I M A
EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
|Year of Mfg.:||2004|
|Elect./Voltage:||600 V, 60 Cy, 3 Ph.|
|Value New:||$ 300,000|
|Region:||EASTERN CDN (Click for Regional Map)|
IMA NOVIMAT CONCEPT 4325 L Edgebander with Pre-Mill and Corner Rounding:
Edgebanding capacity, 0.3 - 3 mm; (0.012 - 0.118"), panel thickness min/max 8 - 60 mm (0.315 - 2.362").
Pre-Milling Unit 08.378, with KW 4.5 x 2 (HP 6 x 2) at 9,000 RPM, vertical joining spindles, w/jump movement and reversible rotation, SIKO digital readouts for positioning.
Pre-Heating Section: Quarz lamps, KW 1.5 x 2 to heat panel edge before gluing.
Gluing System: EVA (Hot Melt) glue with gluepot and vacuum glue refill system
Edge Magazine: Vertical (24) coil quick select and HD guillotine.
Side Pressure Section: Pressure rollers w/individual pneumatic pressure control for each roller.
End Trimming Unit 08.42: High speed, double motor KW 0.66 x 2 (HP 0.88 x 2) suspended from the hold-down beam, automatic chamfer adjustment 0° - 25° for speeds up to 30 m/min (98 ft./min).
Rough Trimming Unit 08.0555: Top & bottom flush triming, KW 1.0 x 2 (HP 1.34 x 2) - 12,000 RPM ea. motor, superimposed motors, tilts up to 3°, operate against the feed (up-milling), large vertical tracing wheels, digital readouts for adjustments.
Multi Function Unit, 08.342: Top & bottom KW 0.66 x 2 (HP 0.88 x 2) motors with quick release motors and HSK tooling for fast chang-over, NC motor positioning for linear fine trimming and Corner Rounding functions.
Profile Edge Scraping Unit 08.519: Top & bottom, for thick PVC banding, vertical & horizontal tracing wheels, digital readouts for adjustments and pneumatic exclusion.
Glue Scraping Unit 08.50: Flat, top & bottom self-tracing glue scraper with reversible insert knifes.
Buffing Unit 08.612: Top & bottom edge buffing, KW 0.25 x 2 (HP 0.34 x 2) - 1,500 RPM ea. motor.
Smoothing Unit 08.53: Top & bottom Smoothing Unit, KW 0.25 x 2 (HP 0.34 x 2) - 1,500 RPM ea. motor, .
Operator & Machine Control:
IMATRONIC 121 Control System, large color TFT display; displays stored data, on/off work station sequence, troubleshooting diagnostic; data input by alphanumeric keyboard.
Microprocessor adjusts according to stored programs or input; pressure section position & pressure control, vertical positioning of all hold-down beam mounted workstations.
Heavy Duty feed chain with 80 mm wide x 60 mm long rubber pad inserts, central lubrication of transort chain, variable feed speed 6 - 30 MPM (20 - 98 FPM);
Motorized central height adjustment of top pressure beam with double V-belt hold-down.
Frequency inverters; ball bearing guided outboard panel support up to 27-1/2", sound enclosure, all stations, all trimming & milling motors DC electrical motor brakes for immediate stopping.
Actual Model is IMA NOVIMAT CONCEPT 4325 L
|Special Note:||Make Offer|
|Comment:||Looking for HEAVY DUTY with lots of features...LOOK NO FURTHER!|
|Written By:||Bob Bullin|
|*Dimensions:||456" L x 60" W x 72" H|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.