EDGEBANDER (HIGH PRODUCTION)
|Year of Mfg.:||2003|
|Elect./Voltage:||480 V, 60 Cy, 3 Ph.|
|Value New:||$ 195,000|
|Region:||MIDWEST (Click for Regional Map)|
HOMAG KAL 310/3/A3 EDGEBANDER (HIGH PRODUCTION);
0.4 - 3 mm Edge thickness cap., min. panel width 55 mm; manximum panel thickness 60 mm;
Feed speed variable up to 18 to 32 m/min (59 to 104 FPM).
Hot melt glue system "QA34" with reversible glue roller applicator; Pressure roll section with (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses.
"HL-81" Double end trim/snip (0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel;
#1999 Open Space for adding Rough trim station at later date.
Top & bottom fine/profile radius trim unit, 0° - 30° tiltable, (0.4 KW - 12,000 RPM) each motor, SIKO digital adjustment.
# 1999 Open Space of 600 mm (23-5/8") for additional working unit.
Last Station: #4402 Top & bottom buffing unit, (0.25 kW - 2,850 RPM) each motor.
Line control with HOMATIC "PC 22" controller features, function in Windows environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem.
Complete with: SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabin for all workstations, adjustable outboard panel support with swing out arms for up to 800 mm, 80 mm feed track pads, and V-groove belt on top pressure beam which manually adjusted.
|Written By:||Dan Wolters|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.