HOME > EDGEBANDERS-OVER $25,000 > EO-012275 > RETURN


For Immediate Help Contact:
Dan Wolters
(800) 374-5009 ext. 376
Intl. +1 (704) 841-2001
dan.wolters@exfactory.com
If not available, try his/her backup:
Bob Bullin ext.346
bob.bullin@exfactory.com
EXF #:   EO-012275  
Brand:  

HOMAG

Model:   KAL 210/7/A20/S2
Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2007
Condition:   Good Condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New:   $ 210,000
Price:   Please call     (Convert)
Region:   MIDWEST (Click for Regional Map)
Description:   (view full)

HOMAG OPTIMAT KAL 210/7/A20/S2 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Specifications:

  Working Capacity:
0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-1/4"), panel thickness 12 - 60 mm, min. edge length 7.8". 

Infeed Section:

  (2) Pre-milling heads (each with 3 kW - 6,000 RPM motor, one with jump control); chip blowoff unit after last head; SIKO digitals for horizontal & turret for vertical adjustments;

   Pre-heating infeed fence (for panel edge).

  Automatic 2-coil feed magazine for coil material up to 3 mm thickness, strip feed magazine for up to 20 mm (3/4") solid wood banding.

  "Quick Melt" glue system "QA 34" with per melt hopper feeder & roller applicator (reversible); pneumatic pressure roll section with (1) large dia. driven & (6) idle rollers. 

Workstations:

  Double motor front & rear end trim (0.7 HP - 12,000 RPM motor ea.), pneumatic chamfer setting.

  Top & bottom rough trims (2 HP - 12,000 RPM motor ea.).

  Top & bottom profile trim units for leading & trailing edge (four 0.6 HP - 12,000 RPM motors), up to 4 mm edge thickness (all trim station motors are 200 Cy HF and equipped w/electronic brakes).

  Profile tracing from top, bottom and side for chamfering or rounding of pre-trimmed PVC edges; pneumatically controlled blowing nozzles; max. edge thickness 3 mm (1/8"), panel thickness 12 mm to 60 mm (15/32" to 2-3/8"); unit laterally adjustable by max. 50 mm (1-31/32"). Collection box for PVC shavings.

  Height adjustment with top pressure beam without tools; manually adjustable with digital mechanical counters.

  Profile Edge Scraping Unit with electro-pneumatic adjustment.

  Top and bottom buffing unit.

Feed & Holddown System:

  Motorized top pressure beam with powered V-belt holddown.

  80 mm Wide Heavy Duty feed chain w/rubber pads, automatic chain track lubrication system.

  5 HP Feed drive for variable feed speed of 23 - 98 FPM. 

Operator & Machine Control:

  HOMATIC "PC 22", 2GHz CPU WITH 512 Mb RAM, USB port, functions in XP Windows environment. 

Keypad with TFT flat screen LCD display, onscreen fault diagnostic, part and lineal feet/meter tracking, etc.; 

Diagnostic analysis from HOMAG via Modem fault diagnostic is possible. 

Complete with:

  SIKO Digital adjustments on top & bottom trim, fine trim, and scraper stations; 10 KVA - 200 Cy frequency converter, electronic DC brakes on all trim motors.

  Sound cabins for all trim workstations, adjustable outboard panel support with floor supports. 

  Actual Model is Optimat KAL 210/7/A20.S2

 

    Special Note: Special Offer
    Comment: Located in our Zeeland Showroom awaiting STILES Technician for Service!
    Written By: Dan Wolters  
    *Dimensions:337" L x 122" W x 72" H
    *Weight:8,000 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.