END MATCHER (W/TENONING)
|Year of Mfg.:||2007|
|Condition:||Very good condition|
|Elect./Voltage:||460 V, 60 Cy, 3 Ph.|
|Value New:||$ 108,000|
|Price:||$ 49,900 USD||(Convert)|
|Financing:||$ 1,015 National Capital Leasing|
|Region:||SOUTHEAST (Click for Regional Map)|
FRUILMAC RANDOMAT-E End Matcher;
For end matching flooring or cabinet & entry door rails; feed thru system allows continuous feeding of random length parts with any kind of profile.
Width cap. of 1-3/16" to 9-7/8"; length cap. of 6-5/16" x 137" length (longer lengths with additional support); 3/8" min. - 1-3/16" max. thickness capacity.
Approx. (10) cycles/Min depending on part length & width; feed system with (2) 120" long x 10" wide powered infeed & outfeed belt conveyors, parts are automatically fed & positioned with sensors, and a positive stop to the 1st vertical shaper head (a 2nd shaper head is next to the 1st one); cope cycle is automatic.
Parts are conveyed past the 1st & 2nd shaper head, automatically reversed and positioned to a positive stop for the 2nd cut on the other end of the part. At the same time the 1st shaper head would be coping the 1st end of another part.
Equipped with: Twin 7.5 HP - 7,500 RPM high speed shaper motors, which pneumatically traverse in tandem for each cutting cycle.
Touch-Screen SIEMENS Controller, PLC controlled conveyor & shaper cut cycle for automatic operation.
Variable feed speed conveyor line; shaper head advance with led readout on the controls.
Cutting station with overhead holddown wheels and 4-point pneumatic clamping with (2) overhead & (2) horizontal clamps.
NOTE: Includes: (1) set of tooling for 3/8" and 3/4" T & G. Insert style.
|Comment:||Came out of a small custom flooring operation with low run-time!|
|Written By:||Jeff Terrill|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.