HOME > DOVETAIL & DRAWER EQUIP. > DL-010668 > RETURN

MEREEN-JOHNSON 1105-E / 99-D DOVETAIL MACHINE (CNC CONTROL)



For Immediate Help Contact:
Ed Webb
(800) 374-5009 ext. 377
Intl. +1 (704) 841-2001
Ed.Webb@exfactory.com
If not available, try his/her backup:
Bernie Straple ext.339
Bernie.Straple@exfactory.com
}
Brand:  

MEREEN-JOHNSON

Model:   1105-E / 99-D
Category:  

DOVETAIL & DRAWER EQUIP.

Machine Type:  

DOVETAIL MACHINE (CNC CONTROL)

Year of Mfg.:   2007
Condition:   Very good condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New:   $ 68,000
Price:   $ 32,500 USD
    (Convert)
Financing: $ 661 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)
EXF #:   DL-010668  
Description:   (view full)

MEREEN JOHNSON 1105-E CNC Dovetail Cutter

For both through & blind dovetails (French & English); dovetails both male-and-female, fronts-and-sides.

Specifications: 20" Total width cap., 5/16" - 3/4" max. material thickness cap., 1-1/2" thickness cap. on lipped fronts, 1-3/4" - 15" drawer height cap., 5" - 48" drawer width cap., and 7" - 28" drawer depth capacity. 

Equipped with: 5 HP - 2,800 RPM Belt drive motor, (5) VORTEC air cooled spindles at 20,000 RPM, cartridge type spindles for easy replacement, dual phenolic chip breakers to minimize tearout.

  CNC Controller with keypad menu & LED readout for fast easy setups, changeovers between sides-and-fronts/backs are made in seconds from the operator console.

  Re-sharpened bits easily accommodated using cutter compensation, tenon/mortise fit is easily adjusted from the operator console.

  No special tools for partial tenon on non-standard sizes, changeovers between part thicknesses are made in seconds from the operator console & simple hand wheel adjustment of clamps, and knowledge of machine tool programming is not required.

  Manufactures up to (80) boxes/Hr.

 

    Special Note: Rare Find
    Comment: Well maintained, beautiful set of machines!
    Written By: David Helms  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    Dovetail joints are used to interlock two pieces of wood using a jigsaw-like link to join the workpieces at a 90° angle. Dovetail joints are made using a dovetail jig. Dovetail jigs are both manual and automated, where the device holds a piece of timber in a vertical position and cuts the dovetail joints with a router using a metal template for accuracy.