For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Joe Retzlaff ext.348


Model:   MVB-54


Machine Type:  


Year of Mfg.:   N/A
Condition:   Good condition   
Elect./Voltage:   208/230 V, 60 Cy, 3 Ph
Value New:   $ 22,500
Price:   $ 4,950 USD
Financing: $ 101 National Capital Leasing
Region:   WEST COAST (Click for Regional Map)
EXF #:   BV-280477  
Description:   (view full)

CEMCO MBV 54 Vertical Boring Machine

54" x 15" Cast iron table with wooden top,

Equipped With:
(2) Universal spindles with movable spindle supports,
(3) 2 HP - 1,725 RPM direct drive spindle motors,
36" Stationary table height;
 6" Max. vertical stroke, spindles advance hydraulically at 0 - 30 strokes/Min;
Foot pedal actuated w/single cycle & continuous automatic modes;
2 HP hydraulic feed pump, 12-gal. hydraulic pump system;

Note: Riggers are required for loading

    Special Note: Hard to Find
    Comment: Well maintained, priced at a fraction of a new one!
    Written By: Original Seller  
    *Dimensions:54" L x 46" W x 98" H
    *Weight:3,000 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.