HOME > BORING MISC. - VERT./HOR. > BV-011233 > RETURN

CEMCO MULTIPLE-SPINDLE VERTICAL BORING MACH. (SEAT BORING)



For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
louis.sicotte@exfactory.com
If not available, try his/her backup:
Joe Retzlaff ext.348
joe.retzlaff@exfactory.com
Brand:  

CEMCO

Model:   MULTIPLE-SPINDLE
Category:  

BORING MISC. - VERT./HOR.

Machine Type:  

VERTICAL BORING MACH. (SEAT BORING)

Year of Mfg.:   N/A
Condition:   Good Condition   
Elect./Voltage:   220 V, 60 Cy, 3 Ph.
Value New:   $ 55,000
Price:   $ 14,500 USD
    (Convert)
Financing: $ 295 National Capital Leasing
Region:   MID ATLANTIC (Click for Regional Map)
EXF #:   BV-011233  
Description:   (view full)

CEMCO - SBV 96, ...Vertical Boring Machine for Chair Seats

Currently setup with (4) templates for (2) different wooden seat bottoms but can be configured however customer would like to configure with his own templates.

Specifications

  Table size 24” x 101”.

  (20) spindles

  Motors range between 0.5 HP and 5 HP.

  Configured at moment from left-to-right.

  (2) Spindles: Bore back posts with pneumatic center clamp.

  (4) Spindles: Legs with pneumatic center clamp.

  (10) Spindles: Back seat spindles with pneumatic with DESTACO style clamps.

  (4) Spindles: Legs with pneumatic center clamp.

  Stationary table stroking upper.

  Foot Pedal Operated.
 

    Special Note: SOLD
    Comment: (1) Chair seat finished drilling per cycle; no CNC can beat that!
    Written By: Louis Sicotte  
    *Dimensions:115" L x 48" W x 95" H
    *Weight:4,750 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.