HOME > BORING MISC. - VERT./HOR. > BV-011220 > RETURN

RITTER R-803 BORING MACH. (HORIZONTAL/VERTICAL)



For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
louis.sicotte@exfactory.com
If not available, try his/her backup:
Joe Retzlaff ext.348
joe.retzlaff@exfactory.com
Brand:  

RITTER

Model:   R-803
Category:  

BORING MISC. - VERT./HOR.

Machine Type:  

BORING MACH. (HORIZONTAL/VERTICAL)

Year of Mfg.:   N/A
Condition:   Reconditioned   
Elect./Voltage:   308 230/460 3Ph.
Value New:   $ 6,339
Price:   $ 4,980 USD
    (Convert)
Financing: $ 101 National Capital Leasing
Region:   SOUTHWEST (Click for Regional Map)
EXF #:   BV-011220  
Description:   (view full)



 Ritter R-803 4 spindle machine has two heads driven by independent Baldor motors,with two spindles on ea head

  Equipped with: Head adjustment via hand crank from 1" - 11" on inside spindle centers, 0" - 3" adjustable spindle stroke; 0" - 4" adjustable table height, 10" x 24" cast iron table size; 7/16" 14-screw shank, 1/2" max. bit cap.

  Complete with: Air operated overhead holddown clamp and foot pedal operated drill cycle.
All air lines replaced/all air controls are replaced with new/Bearings checked as good with Auto Stethoscope.This machine is in top condition equipped with
Baldor Motors.

    Special Note:
    Comment:
    Written By: Steve Coffee  
    *Dimensions:48" L x 70" W x 48" H
    *Weight:628 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.