HOME > BORING MISC. - VERT./HOR. > BV-011172 > RETURN

SICOTTE J 30-4 VERTICAL BORING MACHINE



For Immediate Help Contact:
Louis Sicotte
(800) 374-5009 ext. 329
Intl. +1 (704) 841-2001
louis.sicotte@exfactory.com
If not available, try his/her backup:
Joe Retzlaff ext.348
joe.retzlaff@exfactory.com
Brand:  

SICOTTE

Model:   J 30-4
Category:  

BORING MISC. - VERT./HOR.

Machine Type:  

VERTICAL BORING MACHINE

Year of Mfg.:   2003
Condition:   Cleaned and checked   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New:   $ 39,000
Price:   $ 11,700 USD
    (Convert)
Financing: $ 238 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)
EXF #:   BV-011172  
Description:   (view full)

SICOTTE - J-30-4, ...Vertical Boring Machine

24" x 48" Fixed table and moving head.

Specifications:

  (3) 1-1/2" Spindle with spring collet, 1/2" capacity.

  (3) 2 HP - 1,750 RPM - TEFC Motors, each motor with timing belt drives.

  (2) Spring loaded holddowns.

  Table is fixed while the heads with spindles move hydraulically up & down with an adjustable speed feed (this arrangement can be equipped with an automatic feeding device).

Features:

  0" - 8" Adjustable head stroke.

  Foot pedal activated.

  Vertical stroke and feed speed of the heads with spindles are both adjustable.

  3 HP Hydraulic variable feed motor, vertical spindle movement; movement can be set to either manual, single stoke, or continuous stroke.

    Special Note: Best Buy
    Comment: Regular spindle can be added to this machine!
    Written By: Louis Sicotte  
    *Dimensions:54" L x 60" W x 74" H
    *Weight:3,500 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A boring machine is a device used to produce or enlarge (existing) holes in a workpiece. Boring machines have a cutting tip that can be made of steel, cemented carbide, and small grinding wheels (possibly made of minerals like diamonds). Single point tools are controlled by adjusting the boring head, moving circularly to create/enlarge holes and sweep debris from bored areas of the workpiece. Grinding wheel cutters have planetary/orbital motions, rotating rapidly around its axis. The hole diameter is controlled by adjusting the distance between the wheel axis and spindle axis. Spindles and a spindle axis are axes that rotate either vertically or horizontally on a boring machine. Vertical boring mills are used to rotate a workpiece around a vertical axis, while the boring bar and boring head moves in a linear motion. Horizontal boring mills are used to rotate the boring bar around a horizontal axis to bore holes in a workpiece while it’s held stationary on a table.