HOME > CNC POD & RAIL MACH. CTR. > BP-012623 > RETURN


For Immediate Help Contact:
Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com
If not available, try his/her backup:
Norm Schust ext.445
norm.schust@exfactory.com
EXF #:   BP-012623  
Brand:  

WEEKE

Model:   BP 140
Machine Type:  

CNC MACHINING CENTER (W/ATC/BORING)

Year of Mfg.:   2000
Condition:   Good condition   
Elect./Voltage:   230/460 V, 60 Cy, 3 Ph.
Value New:   $ 175,000
Price:   Please call    
Region:   MIDWEST (Click for Regional Map)
Description:   (view full)

WEEKE BP 140 CNC Machining Center with Auxiliary Routing Spindle & Flat Table

Specifications:

  Work area capacity: X-Axis 110.25" (2,800 mm), Y-Axis 41.34" (1,050 mm).

  X-Axis Stroke 146", Y-Axis Stroke 52", Z-Axis Stroke 10.24" (260 mm).

  Rapid traverse speeds: X-Axis 263 FPM (80 MPM), Y-Axis 196 FPM (60 MPM), Z-Axis 64 FPM (20 MPM).

  Work table: (8) Panel support benches with 51" x 125" Flat table, (Seller has cut 4' x 12' Sheets with an extension support).

Equipped with:

  Boring unit: (1) 2 HP (1.5 kW) Motor, 4,000 RPM, (21) Independent vertical spindles, (10) X-Axis, (10) Y-Axis, (1) Offset spindle for up to 35 mm (1.38") Diameter Drills, (1) Independent 4-way Horizontal boring block with (6) Spindles: (2+2) X-Axis & (1+1) Y-Axis, Maximum horizontal boring depth 1.77" (45 mm), (1) X-Axis Grooving saw with 100 mm (3.94") Diameter Blade, 2 HP (1.5 kW) Motor.

  Routing: (1) 10 HP (7.5 kW) High speed vertical electro-spindle (Main spindle) with HSK F63 Adaptor router, 11 KVA Frequency inverter, Programmable speeds 1,000 - 18,000 RPM, 5 kW (6-1/2 HP) Auxiliary routing spindle with .98" (25 mm) ETP Hydro clamping chuck, 8-Position Ride along automatic tool changer.

  IPC Front End: WEEKE "HOMATIC-2000" with WINDOWS & WOODWOP Version 4.5 Operating system; 17" Color monitor, Industrial keyboard, 1.44 MB Floppy disk drive, 2 GB Hard drive, 32-bit Processor, Ethernet interface, RS-232 Serial interface.

  NUM Programmable logic control (PLC) for linear, circular & helical interpolation, All mounted in separate free-standing control cabinet, Pedestal, Pendant & (2) Foot pedal controls.

Complete with:

  Manuals.

  NOTE: No Vacuum Pump.

  NOTE: Photos were recently taken of installed machine. Machine was then de-installed and stored.

  NOTE: THIS MACHINE WAS CONVERTED FROM A POD AND RAIL MACHINE TO A FLAT TABLE MACHINE BY STILES MACHINERY!

Dimensions: 265" x 104" x 120" H.
Weight: 11,500 Lbs.

    Special Note:
    Comment: Complete with auxiliary routing spindle!
    Written By: Kevin Welker  
    *Dimensions:240" L x 144" W x 84" H
    *Weight:9,020 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.