You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com





If not available, try his/her backup:
Dan Wolters ext 376
dan.wolters@exfactory.com


EXF #:   VG-010586  
Brand/Model:  

TYLER 2400

Machine Type:  

SLAT-WALL MACHINE

Year of Mfg.:   1984
Condition:   Good Condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New: $ 198,000    Act Now!
Price: $   40,000 USD     (Convert)
Financing:   $ 814 National Capital Leasing
Region:   SOUTHEAST (Click for Regional Map)

Description:

TYLE 2400 SLAT-WALL MACHINE:

  • Specifications:
    Produces T-slots "Slat-Wall" for architectural/store fixture panels.

    48" x 97" Max. panel capacity., 24" x 24" min. cap., panel thickness 0.5" to 1.5"; 

    Machine capable of processing up to (40) panels/Hr, depending on material density, thickness and the slot profile.
  • Equipped with:
    This machine is currently set up with (17) router spindles on 3" centers,

    Spindles are driven in groups of (3) with (6) 7.5 HP - 3,450 RPM motors that drive the (17) router spindles, all router spindles rotate @ 15,400 RPM.

    This machine can accept up to (21) router spindles & the additional spindles can be activated by adding (1) additional 7.5 HP - 3,450 RPM motor.
  • Machine Operating Sequence:
    Panels remain stationary on top, pneumatically clamped in place while the bottom mounted router bank traverses the full length of the panel with a high speed return,

    Variable feed speed control, router assembly traverses on ground & polished rails with chain drive.

    Panels are positioned along the 8' rear edge fence line, distance from the panel edge to the centerline of the 1st cut can be adjusted from 0.0" - 3" (1 router spindle pitch).
  • Operator & Machine Control:
    Allen Bradley electrical controls for the machine cycle and a "setup" mode of operation;

    Machine cutting cycle is initiated by a 2-hand operator safety buttons located on the right front of machine.
  • Complete with:
    Overhead holddown assembly with (2) large air cylinders and (6) arms with spring loaded clamping pads hold the panel in place.

    Panels are loaded from the 8' front and exit to the side for easy unloading.
  • Options Include:
    "Optional" 60" x 97" Max. panel processing capacity; (17) used diamond router bits; (2) extra motors; parts book and service manual and dust collection chutes attached to machine.
  • Actual Model is TYLE 2400
Questions? For Instant Communication, Click Here
Special Note: Hard to Find
Comment: Seller states "Machine was completely rebuilt in 2001 and taken out of service in November of 2006"
*Dimensions: 115" L x 75" W x 45" H
*Weight: 4,150 Lbs
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions