You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Louis Sicotte
(800) 374-5009 ext.  329
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Dan Wolters ext 376

EXF #:   TE-011518  


Machine Type:  


Year of Mfg.:   1998
Condition:   Good Condition   
Elect./Voltage:   575 V, 60 Cy, 3 Ph.
Value New: $ 145,000    Act Now!
Price: Please Call     (Convert)
Financing:   National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)


SCMI Concept 2000 Double End Tenoner

  • 102" (2,600 mm) Opening cap., motorized opening with keypad entry & LED readout.
  •  32" load space at infeed chain area in front of holddowns,
  • 0" - 4" motorized thickness opening with mechanical digital readout, 6" min. width, 2-post machine. 

    Each side equipped with:
  •  1st Station: Trim saw ,9 HP, 3,450RPM
  •  2nd Station:  Jump Coping unit  with 12 HP motor, 7,000 RPM 
  • 3rd Station: Coping unit with 12 HP motor, 7,000 RPM
  • 4th Station: Coping unit with 12 HP motor, 7,000 RPM
  • 5th Station Belt sanding unit with 1.8/2.4 HP
  • 2 HP Drive for 10 - 60 FPM variable feed speed,
  • Chain dogs on 15-3/4" centers, rubber top non-marring chain pads,
  •  Heavy Duty chain links with needle bearings, automatic oil mist chain oiler, automatic brake on feed motor with emergency stop. 

    Complete with:
  • : Upper driven holddowns with continuous feed belts, feed beams can be disengaged for conventional part feeding in front of dogs; mobile remote control for setup, dual lead screw for traversing beam, and exhaust hoods on all heads.
  • Stand alone control cabinet w/ push button controls
  • Adjustable infeed fence

    Note Still in production until November 20 2020
Special Note:
Comment: Kitchen door production with perfectr squaring
*Dimensions: 204" L x 136" W x 90" H
*Weight: 11,000 Lbs
Written By: Louis Sicotte
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions