You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. We are awaiting literature from the principals.

For Immediate Answers Contact:
Amanda Solomon
(800) 374-5009 ext.  374
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Ed Webb ext 377

EXF #:   SB-011583  


Machine Type:  


Year of Mfg.:   1998
Condition:   Good Condition   
Elect./Voltage:   440 V, 60 Cy, 3 Ph.
Value New: $ 80,000    Act Now!
Price: $ 12,500 USD     (Convert)
Financing:   $ 254 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)


MZ PROJECT UNIDUE HOPPER 013 Template Band saw

  • Template Band Saw with 33" throat cap., 15" under guide, 33" dia. wheels, 10 HP belt drive motor for optimum blade speed, 1/8" - 1 3/4" blade width cap.
  • 56" Wide x 84" long table; entire table with 3" in-and-out travel for tracing patterns. Also includes CNC controlled 50" in-and-out clamp movement on top of table;
  • 13" wide x 91" long return conveyor to operator.
  • Operation: The machine uses a simple template made of laminated wood. The template is located at the rear of the machine. (2) Templates are accepted & independently controlled by the machine: (1) For the outside cut; the 2nd for the final cut in case the workshape is not symmetrical.
  • The template copying device is controlled by pneumatic cylinder, which positions the tracing head into position on the template and withdraws the head when the traveling table (controlled by hydraulic cylinder) returns to the rear start position.
  • The tracing head is linked to the band saw blade by means of pivoting arms to the upper-and-lower blade guidance systems. As the template moves forward with the table, the tracing head moves along the template edge twisting-and-turning the vertical blade at the same time the table moves on the pneumatic horizontal cross-transfer and longitudinal movement.
  • An automatic feed device is mounted on the upper table and automatically positions the stock at the cutting line after cutting cycle until the stock in finished.
  • Cuts lengths up to 2,000 mm, max. size workpiece is 2,000 L x 1,200 x 100 mm; height of cut is from 0 - 100 mm; angle cut +/- 45°; dwell (depth of curve) is 150 mm; blade length 5,730 mm and a blade speed of 1,550 RPM; forward table speed is 0 - 16 MPM with return speed of 40 MPM.
  • Hydraulic pump cap. is 25 liters and the pump motor is 2.5 HP providing working pressure of 40 Bar. Pneumatic working pressure is 6 Bar.
  • Equipped with: (2) 6" Dia. dust hoods; automatic hopper feeder controlled by electronic positioner to advance the workpiece via ball screw & DC motor; double template device for cutting pieces with (2) profiles, hydraulic copy system, automatic table speed control, automatic electric lubrication system, pneumatic blade tension, (2) pneumatic clamps, and self-braking band wheels.
Special Note:
Comment: Not frequently available, it wont last long on the market
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Louis Sicotte
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions