You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
Click here to view all literature

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext.  349
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Joe Retzlaff ext 348

EXF #:   PD-010738  


Machine Type:  


Year of Mfg.:  
Condition:   Very good condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 37,500  
Price: $ 16,800    Act Now!
Financing:   $ 342 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)


CANTEK Model C-610-AS Double Surfacer


  • 18" x 6" Cap., min. material length 12". Table size is 111" x 24".
  •  25 HP top and 20 HP bottom belt driven motors.
  • Minimum working length is 12" and minimum working thickness is 1/4".
  • Variable feed speed 20 - 90 FPM powered by a 3 HP feed motor.
  • 1/2 HP motor for table raise & lower and (4) ball screws.
  • Top and bottom spiral insert knife cutter heads with a total of (180) inserts set in (6) rows of (30) insert knivess which are 14mm x 14mm x 2mm. Knives have (4) cutting edges and can be turned 4-times! 

  • Rugged cast iron and plate steel fabrication; Infeed conveyor/carpet (spiked) allows precision jointing accuracy especially on warped or twisted lumber.
  • Computerized top cutterhead positioner is accurate to +/-0.001"; Cutterhead tooling technology guarantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficult hardwoods.
  • Patented lifting column system (synchronized transmission) guarantees repetitive setup and long-term dependability.
  • Driveshaft and universal joint drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives.
  • Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys; Cutterheads are supported by "NSK" class 7 precision ball bearings and precision housings.
  • Chromed beds; Guards and skirts for operator safety.
  • Dust Collection: 3600 CFM.
  • Actual Model is C-610AS
  •  Draws a total of 68 amps with as the largest 25 HP motor.  
Questions? For Instant Communication, Click Here
Special Note:
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Jeff Terrill
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions