You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com





If not available, try his/her backup:
Jim Reedy ext 455
jim.reedy@exfactory.com


EXF #:   PA-019146  
Brand/Model:  

SELCO WNA 600

Machine Type:  

ANGULAR PANEL SAW SYSTEM

Year of Mfg.:   2006
Condition:   Reconditioned   
Elect./Voltage:   400/440 V, 50/60 Cy, 3 Ph.
Value New: € 365,000  
Price: € 135,000    Act Now!
Financing:   € 2,698 National Capital Leasing
Region:   EUROPE (Click for Regional Map)

Description:

SELCO WNA 600 SL ANGULAR PANEL SAW SYSTEM;

  • Specifications:
    173" (4,400 mm) Rip cap., 86" (2,200 mm) cross-cut cap.; 5.1" (132 mm) max. saw blade projection.
  • Rip-cut & Cross-cut Saws:
    Each section with its own 30 HP (22.3 kW) main saw motor, 11.8" (300 mm) dia. Main blade;

    3 HP (2.2 kW) Scoring motor, 7.8" (200 mm) dia. scoring blade.
  • Rip-cut & Cross-cut section Saw Carriages:
    AC Servo Brushless saw carriage drive motors,

    Travel speed 0 - 492 FPM (0 - 150 MPM) forward speed, 492 FPM (150 MPM) return speed,

    Pneumatic pressure beams with precision rack & pinion system on both sides.
  • Rip-Cut Section:
    Machine table with Polyamide gravity rollers on rails to facilitate smooth & accurate infeed of panels;

    (3) pneumatic front aligners align panels before pressure is applied by the grippers.
  • Programmable Rip-cut pusher fence:
    Travel speed 0 - 196 FPM (0 - 60 MPM) forward speed, 196 FPM (60 MPM) return speed,

    AC Servo brushless drive motor, Rack & pinion drive system;

    (5) Pneumatic free floating raise-and-lowered material gripper clamps to avoid material jamming. 
  • Transfer Section:
    Middle Buffer Station (MBS) with logic for staggered cuts without interruption of the cut-cycle;

    Carriage pusher bar with rack & pinion drive moves cut strips over transfer table to the cross-cut section,

    0.9 HP (0.7 kW) Drive motor, travel speed 16.5 - 65 FPM (5 - 20 MPM);

    Pneumatic trap door for automatic ejection of trim strips.
  • Cross-cut Section:
    Machine table with Polyamide gravity rollers on rails to facilitate smooth & accurate feeding of panels;

    (4) Robust pneumatic aligner posts & front aligner bar align panels before pressure is applied by the grippers;
  •  Programmable Cross-cut pusher fence:
    Travel speed 0 - 196 FPM (0 - 60 MPM) forward speed, 196 FPM (60 MPM) return speed,

    AC Servo brushless drive motor, Rack & pinion drive system; 

    (10) Pneumatic free floating raise-and-lowered material gripper clamps to avoid material jamming

    Pneumatic cross-cut side alignment device align panels against the square fence before cross-cutting,

    (1) side aligner in front  & (1) side aligner behind the cross-cut line, both aligners are equipped with rubber coated rollers to keep the strips aligned during positioning.
  •  Operator & Machine Control:
    PC front end with "NC 500" + Windows  operating system: 15" SVGA Color flat-screen monitor, industrial key-board & mouse;

    CELERON processor with 10G hard drive, 128 MB RAM; CD ROM; virtually unlimited memory capacity for complete cutting patterns, lists, sequences, error reporting & clear text diagnostics; online connection for data transfer is possible;

    "DIGISET" electronic scoring saw adjustment through the NC (no tools required), automatic saw blade cutting height & travel speed adjustment according to book height of panels
  • Rear Loading Sysytem:
    173" (4,400 mm) x 87" (2,200 mm) lift table; 10,000 Lbs max. lifting table cap.; max. stack height 28" (711 mm) without pit or risers.
  • Front of the machine:
    (6) Air flotation tables 81" x 24" (2,060 x 610 mm).
  • Complete with:
    Wire mesh safety guards & photo-eye barriers around all open machine sections.
  • Options Include:
    ● (1) Left-Hand mounted in-feed conveyor with powered rollers & fork cut-outs ● Thin material loading device
  •  Actual Model is SELCO WNA SL 4400/2200
Questions? For Instant Communication, Click Here
Special Note:
Comment: A TRUE WORKHORSE...VERY FAST & ready for delivery!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions