You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals.
We are awaiting literature from the principals.

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Dan Wolters ext 376

EXF #:   MA-010781  


Machine Type:  


Year of Mfg.:   2016
Condition:   Excellent condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 45,000  
Price: $ 19,800    Act Now!
Financing:   $ 403 National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)


DOUCET MODEL MSP-MFE-300-16 LATERAL CHAIN FEED TABLE WITH HAUL-UP CHAINS and with the following specifications:

  • Working dimensions: Length 16' x 9-1/16" wide by 3-3/4" high
  • Working area: (8) sections of infeed chain with 140" of lay-up area.
  • Feed: 10 HP electric feed works with (2) rollers above and (2) rollers below the passline for positive feeding . Feed Table feed speed is synchronized with the machine it's feeding for a smooth flow of material.
  • Includes: Top and bottom lateral pressure fences for product containment and alignment.

    The Lateral Chain Feeder Model MFE-150 is designed for continuous feed up to 150 feet per minute of fixed or random length pieces .

  • On the feed table, boards are automatically placed along the feed line by perpendicular strands of chains. A pneumatic system lowers chain carriage between each feed cycle thus preventing unnecessary friction between the piece being fed and the reserve material. Boards are automatically driven in sequence by a combination of two powered wheels located under the material and two top pressurized wheels. 

  •  Length capacity is 3' to 16'
  • 36" long feed table width with (8) chains C2060 rails on pneumatic up/down mechanism
  • Feed chains powered by electric motor with variable speed
  • Two bottom feed flat wheels made of steel 3/4" wide, powered by electric motor with variable speed
  • Torque control module on feed wheels by 10 HP VFD to maintain constant pressure without slipping
  • Two top pressurized flat wheels made of steel 3/4" wide covered with urethane, non-motorized
  • Easy to access thickness adjustment at the front of the feeder
  • Interface relay to stop feeding cycle when moulder feed is stopped
  • Adjustable reference lateral fence, 1/2" movement into slot, tools required for setup
  • Standard working height 32" to 36" 
Questions? For Instant Communication, Click Here
Special Note:
Comment: Built in Aug. 2016, installed in Oct. and not used for the past year!
*Dimensions: 180" L x 92" W x 60" H
*Weight: 1,800 Lbs
Written By: Jeff Terrill
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions