You are not logged in.    Login  |  Register  |  Help

We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Dan Wolters
(800) 374-5009 ext.  376
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Tony Cornacchione ext 432

EXF #:   FS-010718  


Machine Type:  


Year of Mfg.:   2007
Condition:   Good Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 850,000    Act Now!
Price: $ 184,600 USD     (Convert)
Financing:   $ 3,669 National Capital Leasing
Region:   SOUTH (Click for Regional Map)


2007 CEFLA EASY W Spray Line with both Vertical Oven and UV Curing AND set up for High Gloss Finishes

This line was built for use with high gloss finishes so the sprayer features a Water Wash air filtration system (which can be and likely should be converted to dry filter type). Includes additional full pressurized enclosures for the EASY 2000 sprayer and UV curing oven. Also a full CEFLA Hyperfilter system mounted above the line which delivers extra clean and heated air to the enclosures.  Heat is supplied by a COPPER FIN II gas fired thermal fluid boiler included.   Overall a clean line.  

Line consists of:

 1. Loading Conveyor,  length of load space 3450 mm,  Model TNS 3650 / RBT
 2. Panel cleaning Brush with ostrich feather brush head and extraction. Model V8 / 32-AT / 8

 3. Easy W Automatic Reciprocating Sprayer with (4) four roll recovery system. This is a "wet filter"  system but can be converted to a dry filter system. 8 (4 + 4) KREMLIN guns, fed by (2) KREMLIN pumps. There are many spare guns and parts included, this sprayer was used for UV curable High Gloss topcoat. One of the reciprocating arms is not working and it has not yet been determined what the issue is, most likely an electrical problem. The touch screen on the control is new and there is a spare.

 4. VERTICAL  (4) four level vertical inline vertical PF style oven, with belted tray capacity of 7,500 mm long and part thickness up to 5". Ventilation in flow longitudinal air on trays, heating hot water.
 5. Flash off tunnel 7,000 mm (275") long with Jet Air style air flow and IR complete with chrome bar style conveyor. hot water heat exchanger mounted on top with air recirculating system.  Model FEV EU2 4TT 7000
  6. ULTRAVIOLET DRYING TUNNEL consisting of: (2) upper lamps placed at an angle to the direction of movement of the pieces (1) lower lamp (1) hood with cooling to air nozzles overall length 4,000 mm. Variable adjustment, directly from the electrical panel, of the power of the upper lamps, from 60 to 120 Watts/cm, Model UV 2000 + FEV NIR
 7. Outfeed conveyor  3500 mm Model TRC 3500

8. FILTRATION GROUP / EXTERNAL AIR INTAKE, for pressurizing spraying, conveyor and vertical oven. Full of battery for heating by hot water with automatic adjustment of temperature. Filters in cartridges, humidification device and night fan: acts when the main fan is off, eg in periods of non- work. Structure of support: included. 

KNOWN Issues:
1. One of the reciprocating arms is not functioning and determined to be in the wiring harness
2. Belt cleaning and recovery system not functioning, requires rebuilding
3. Motor in vertical oven needs to be repaired or replaced.


    Special Note:
    Comment: Complete line for less than $200,000 - avail. immediately!
    *Dimensions: Available From Product Manager
    *Weight: Please Call
    Written By: Dan Wolters
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    Terms & Conditions