You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext.  349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Dan Wolters ext 376
dan.wolters@exfactory.com


EXF #:   FJ-010634  
Brand/Model:  

CANTEK FL-08

Machine Type:  

VERTICAL FINGER JOINTER

Year of Mfg.:   2015
Condition:   Very good condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 150,000  
Price: $   58,800    Act Now!
Financing:   $ 1,182 National Capital Leasing
Region:   WEST COAST (Click for Regional Map)

Description:

CANTEK FL-08 Automatic Vertical Finger Joint Line

With the Following:


MODEL "F-I29-T2" Automatic Infeed Table

  • Table Size is 35” long x 23” wide and equipped with 1/2 HP motors.
     
    "F-C07" Auto Finger Joint Shaper, Left and Right Sides:

    Incoming Block Capacity:
  • Block Lengths from 5.9” to 35.4”
  • Block Widths with Vertical Jointing from 0.78” to 2.36”.
  • Block Width with Horizontal Joint up to 6” (wider possible – optional).
  • Thickness, Vertical Jointing from 0.78” to 6.3”.
  • Thickness Horizontal Jointing from 0.78” to 2.36”.

    Specifications: 
  • 20 HP Motor for Shaper Spindle.
  • 5 HP Motor for Trim Saw.
  • 2 HP Motor for Bottom Scoring Saw.
  • 1/2 HP for Feed Conveyor with Variable Speed Frequency Drive.
  • Cycle Speed of max. 3~4 Cycles/Min.
  • Note: Right side Shaper equipped with roller type glue applicator.
     
    "F-D16" Transfer Roller (From RH Shaper to Assembly Machine)
  • Table Size: 23.6" wide x 35.4” long.

    "F-A05-6" Two-Staqe Auto Finger Assembler
  • Output Length: Up To 236” - 19.68’.
  • Width from 0.78” to 6.3”.
  • Thickness from 0.78” to 2.36”.
  • 2 HP Drive for Feed Table.
  • 5 HP Motor for Cut Off Saw.
  • 5 HP Motor Hydraulic Pump.
  • Speed of approx. (4) to (5) Finished boards/Min.
     
    All Electrics are to UL/CSA Standards with Wye Delta – Includes Soft Starter.

    Includes: Extra belts, blocks, cutter heads and some knives.
     
    Note: This system performs best when incoming blocks are run thru a 4-Sided Planer or Moulder.

    Production Example running 2" x 6" Blocks:
  • 1-1/2" x 5-1/2" Blocks, 23.6" table = (15) blocks per cycle.
  • (3) Table cycles per minute x 15 Blocks = (45) blocks per minute.
  • (4) Table cycles per minute x 15 Blocks = (60) blocks per minute. 

    Average Block Length of 24" = 90 to 120 LINEAL FPM

    NOTE: SYSTEM NEEDS A GOOD "TUNE-UP" INCLUDING A FEW ELECTRICAL AND PNEUMATIC PARTS

    EXPECT TO SPEND $10,000 TO $15,000 BEFORE YOU'RE DONE

    THIS POINT IS REFLECTED IN OUR WILLINGNESS TO TAKE AN OFFER
Questions? For Instant Communication, Click Here
Special Note: Like New
Comment: A "like new" Finger Joint System for less than $100,000!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Jeff Terrill
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions