You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Ed Webb
(800) 374-5009 ext.  377
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext 329

EXF #:   EU-014077  


Machine Type:  


Year of Mfg.:   2006
Condition:   Good Condition   
Elect./Voltage:   230 V, 60 Cy, 3 Ph.
Value New: $ 145,000    Act Now!
Price: $   19,500 USD     (Convert)
Financing:   $ 397 National Capital Leasing
Region:   PACIFIC NORTHWEST (Click for Regional Map)


BIESSE AKRON 855 Computer Controlled Production Edgebander

Features & Main Specifications:
Computer controlled interface for workstations with servos and pneumatic positioning devices. Programmable selections for 1 touch changeover between edgebanding types and thicknesses. Edgebanding thickness, 0.4 - 19 mm capacity. Min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.
Feed Speed variable from 10 - 20 MPM, 3 HP feed drive.

Front-End Equipped With:

  •  Premilling Unit, ... with (4) positions for automatic changeover between pre-mill settings NC controlled. 
  •  Strip & Coil Edgemagazine, ... automatic with "HD" shear type guillotine.
  •  Top Pressure Beam, ... on-screen adjustable for height positioning.
  •  Hot-Melt Glue System, ... (12 min. heat up time) with teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode.
  •  Side Pressure Section, ... with (1) large dia. "non-stick" coated drive roller and (5) teflon plated idle rollers with servo positioning and NC controlled material thickness adjustment.

  • End Trimming Unit: Front & rear (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 15° on horzontal. plane NC controlled
  • Flush Trimming Unit: Top & bottom with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup. 2 position NC controlled
  • Flush/Bevel/Radius Trimming Unit: Multi-use top and bottom 2-motor (0.3 HP - 12,000 RPM). Servo driven positioning of motors for different edge trimming set-ups. NC controlled adjustment between profiles and positions.
  • Corner Rounding Unit: 4-motor (0.3 HP - 12,000 RPM motors) for trimming leading & trailing upper & lower edge/corners with "Fast Position", and can be used as a second top & bottom fine trimmer as well.
  • Profile Scraping Unit: Top & bottom for 2 mm or 3 mm thick PVC banding, digitals for horiz. adjustments.
  • Flat Scraping Unit: Top & bottom for glue and fine panel scraping.
  • Buffing Unit: Top & bottom (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°.
  • Hot Air Blower Unit: Top & bottom edge reactivation station (2,000 Watt) hot air blowers with temperature adjustment. 

    Complete With: 
  • Programmable processor for workstations & feed speed.
  • Insulated sound enclosure over all trim stations with triple split dust hood, industrial lights and viewing windows. 
  • Extendible side panel support rail, 
  • 12 KVA - 240 Hz digital frequency inverters.

    Used tooling on all workstations.
  • Extra set of diamond tooling for pre-mill unit
  • (1) pre-mill motor
  • chain pads have been replace 2 years ago
Special Note: Great Value
Comment: Motivated seller says "MAKE A REASONABLE OFFER"!
*Dimensions: 330" L x 59" W x 69" H
*Weight: 7,750 Lbs
Written By: Louis Sicotte
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions