You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext 329

EXF #:   EO-280366  


Machine Type:  


Year of Mfg.:   2006
Condition:   Good Condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 200,000    Act Now!
Price: Please Call     (Convert)
Financing:   National Capital Leasing
Region:   MID ATLANTIC (Click for Regional Map)


BIESSE STREAM B1 9.0 ... Production Egebander with Pre-Milling & Corner Rounding

  • Specifications:
  • Capacity,  0.4 - 15 mm edge thickness cap., min. panel width 100 mm, panel thickness 10 - 60 mm, min. panel length 150 mm. 
  •  Pre-Milling Unit: With jump control & side copying unit for managing warped panels, 2-position infeed fence, digitals readouts.
  • NC 410 Controller with: Graphic interface on MS-Windows 2000 Professional, 32-bit operating system; high resolution LCD color screen, unlimited" number of working programs, each with functions for remote control of processing units; fault diagnostic, bar code reader adaptable; etc.
  • Automatic (2) coil vertical feed magazine for coil material up to 3 mm thickness with automatic changeover.
  • Patented Glue System w/pre-melt, large separated granular hopper for easy filling & high gluing capacity, with roller applicator (reversible);
  • Pressure Section, (1) large driven pressure roller & (6) pneumatic secondary pressure rollers. 

  • End Trimming:
    Double motor front & rear linear end trimming unit "IT 46" (0.4 HP/0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting, 0° - 15° adjustable. ÷
  •  Pre/Rough Trimming:
    Top & bottom "RS 10" (1.75 HP/1.3 kW - 12,000 RPM motor ea.), pneumatic exclusion & positioning from control panel.
  • Radius/Bevel Trimming:
    Top & bottom (0.87 HP/0.65 kW - 12,000 RPM motor ea.), tiltable 0° - 30°, pneumatic exclusion from operator panel.
  • Corner Rounding:
    4-Motor for leading & trailing edges.
  • Profile Scraping Unit:
    Top & bottom with collection box.
  • Flat Glue Scrapers:
    Top/bottom to remove potential glue squeeze-out.
  • Buffing Unit:
    Top/bottom, ozcillating/tilting "SZ 30" w/pneumatic exclusion control from control panel & 0.67 HP/0.5 KW- 1,400 RPM motors;
  • Hot Air Unit:
    Top/Bottom hot air blowers to reactivate/smooth heavy pvc radiused edges. 

    Complete With:
    - Motorized top pressure beam with powered V-belt hold-down, electronic positioning by NC controller.
    - 80 mm wide Heavy Duty feed chain w/rubber pads, 
    - 4 HP feed drive for feed variable speeds of 26 - 78 FPM. 
    -  Pneumatic Pre-set Stop System for most adjustments via the control panel on top & bottom trim, fine trim, and scraper station,
    - Electronic frequency inverter, electronic DC brakes on all trim motors.
    - Sound cabins for all trim work stations, outboard panel support.

    Note: Actual Model ...  BIESSE STREAM B1 9.0
Special Note:
Comment: Heavy Duty Production Edgebander with a lot of automatic set-up features.
*Dimensions: 0" L x 0" W x 0" H
*Weight: 0 Lbs
Written By: Original Seller
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions