You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext 329

EXF #:   EO-012307  


Machine Type:  


Year of Mfg.:   2016
Condition:   Very good condition   
Elect./Voltage:   230/400 V, 50/60 Cy, 3 Ph.
Value New: $ 62,000    Act Now!
Price: $ 36,500 USD     (Convert)
Financing:   $ 742 National Capital Leasing
Region:   MID ATLANTIC (Click for Regional Map)



  • Edge & Workpiece Capacity:
    0.4 - 3 mm Edge cap., min. panel thickness 8 mm (0.3"), max. panel thickness 40 mm (1.57"), min. panel width 70 mm (2.75"). 

    Line control (NO limit switches) for workstation function. Automatic height adjustment with top pressure beam for all work station. Auto in-feed stop to insure proper spacing between panels.

    Pre-Milling Station  
    (2) Motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges.

  • Edge Feeding & Gluing Section:
    Automatic magazine for strip & coil (large coil table 800 mm diameter to accommodate large coils of 3 mm PVC) stock, 

    3 mm PVC guillotine, Pressure Section with (1) large drive plus (2) idle rollers "pneumatically controlled" 

    Hot Melt granulate quick heat-up glue system.

  • End Trimming:
    2 x 0.18 kW (1/4 HP), 12,000 RPM motors, THK guided, chamfers 0° - 15°.

  • Flush/Bevel/Radius Trimming:
    Top & bottom, bevels 0° - 15° with (2) servo motors for programmable positioning of cutter-heads,
    For 3 mm PVC radius w/digital read-out set-up and pneumatic change-over from thin to thick pvc edges tape.
  • Profile Scraping Unit:
    Top & bottom for 2 - 3 mm radius, pneumatically controlled blow-off nozzles.
  • Flat Scraping Unit:
    Top & bottom flat scraping units with copy wheels to remove residual glue squeeze-out.
  • Operator & Machine Control:
    EC-10+ Program Control with easy to read large 4-line operating display with simple menu format and optimized line-point adjustment. 

    Fast access to all unit functions through dedicated control buttons. 

    Quick change over to different edge banding material through user-defined programs. 

    Clear text error diagnostics provide high operating convenience, 
  • Complete With: 
    Trim stations have HF motors w/electronic brakes. ~ Fixed feed chain track speed of 8 MPM (26 FPM), 2 HP feed drive; Used tooling. 

    Actual Model is BRANDT AMBITION 1210 (aka 0- KDF 210 )
Special Note: Like New
Comment: Almost like new with very little hours as shown on control
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Walt Piedrahita
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions