You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext 329

EXF #:   EO-012260  


Machine Type:  


Year of Mfg.:   2009
Condition:   Good Condition   
Elect./Voltage:   600 V, 60 Cy, 3 Ph.
Value New: $ 145,000    Act Now!
Price: $   23,500 CAD     (Convert)
Financing:   $ 478 National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)


BIESSE STREAM B1 7.5  ... Edgebander with High Speed For Thin Edge

Edge thickness cap. 0.01" - 0.03" (0.3 - 2 mm), min. panel width 2.5" (65 mm), panel thickness 0.4" - 2.4" (10 - 60 mm), min. panel length 6" (150 mm). 

Front-End Configuration: .

  • Edge Magazine, automatic (2) coil vertical for coil material up to 3 mm thickness with automatic changeover. Solid Wood Edge Kit for up to 20 mm (3/4") thick straight edge-strip processing.
  • Glue System (SP20) EVA (Hot Melt) patented w/pre-melt, large separated granular hopper for easy filling & high gluing capacity,
    reversible glue roller applicator.
  • Side Pressure Section, (1) large inverter driven roller and (6) idle pressure rollers. servo motor, programmable positioning.

    Operator & Machine Control: 
  • "NC 410" Controller With: Graphic interface on MS-Windows XP Professional , 32-bit operating system;
  • High resolution LCD color screen unlimited" number of working programs, each with functions for remote control of processing units; fault diagnostic, bar code reader adaptable; etc. 

  • End Trimming (IT90-S):
    Double motor front & rear linear end trimming unit (2 x 0.4 HP/0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting, 0° - 25° adjustable.
  • Pre/Rough Trimming (RS10):
    Top & bottom "RS 10" (1.75 HP/1.3 kW - 12,000 RPM motor ea.), pneumatic exclusion & positioning from control panel.
  • Flat Glue Scrapers Top/bottom to remove potential glue squeeze-out
  • Buffing Unit (SZ30):
    Super imposed top/bottom, oscillating/tilting w/pneumatic exclusion control from control panel & 2 x 0.67 HP/0.5 KW - 1,400 RPM motors;

    Complete With:
  • Motorized top pressure beam with powered V-belt holddown, 80 mm wide Heavy Duty feed chain w/rubber pads, 
  •  4 HP (3 kW) feed drive for feed variable speeds of 33 - 113 FPM (10 - 35 MPM).
  • Electronic positioning by NC controller with Pneumatic Pre-set Stop System for most adjustments via the control panel on top & bottom trim, fine trim, and scraper station, electronic frequency inverter.
  • Electronic DC brakes on all trim motors, sound cabins for all trim work stations, outboard panel support,

    Actual Machine Model: ... STREAM B1
    NOTE: Return conveyor in pictures not included
Special Note:
Comment: High speed thin edge machine
*Dimensions: 0" L x 0" W x 0" H
*Weight: 0 Lbs
Written By: Louis Sicotte
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions