You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com





If not available, try his/her backup:
Louis Sicotte ext 329
louis.sicotte@exfactory.com


EXF #:   EO-012219  
Brand/Model:  

BIESSE STREAM B1

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2011
Condition:   As Is Condition   
Elect./Voltage:   220 V, 60 Cy, 3 Ph.
Value New: $ 210,000    Act Now!
Price: $   40,000 USD     (Convert)
Financing:   $ 814 National Capital Leasing
Region:   SOUTH (Click for Regional Map)

Description:

BIESSE STREAM B1 7.5  ... Edgebander with Pre-Mill & Corner Rounding:

Edge thickness cap. 0.01" - 0.8" (0.3 - 20 mm), min. panel width 2.5" (65 mm), panel thickness 0.4" - 2.4" (10 - 60 mm), min. panel length 6" (150 mm). 

Front-End Configuration:

  • Pre-Milling Unit with jump control & side copying unit for managing warped panels, 2-position in-feed fence, digitals readouts.
  • Pre-heating Section, infra-red, top & bottom lamps to pre-heat the panel edge.
  • Edge Magazine, automatic (2) coil vertical for coil material up to 3 mm thickness with automatic changeover. Solid Wood Edge Kit for up to 20 mm (3/4") thick straight edge-strip processing.
  • Glue System (SP20) EVA (Hot Melt) patented w/pre-melt, large separated granular hopper for easy filling & high gluing capacity,
    reversible glue roller applicator.
  • Side Pressure Section, (1) large inverter driven roller and (6) idle pressure rollers. servo motor, programmable positioning.

    Operator & Machine Control: 
  • "NC 410" Controller With: Graphic interface on MS-Windows XP Professional , 32-bit operating system;
  • High resolution LCD color screen unlimited" number of working programs, each with functions for remote control of processing units; fault diagnostic, bar code reader adaptable; etc. 

    Workstations:
  • End Trimming (IT90-S):
    Double motor front & rear linear end trimming unit (2 x 0.4 HP/0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting, 0° - 25° adjustable.
  • Pre/Rough Trimming (RS10):
    Top & bottom "RS 10" (1.75 HP/1.3 kW - 12,000 RPM motor ea.), pneumatic exclusion & positioning from control panel.
  • Radius/Bevel Trimming (RF40):
    Top & bottom (0.87 HP/0.65 kW - 12,000 RPM motor ea.), servo motor positioning allowing multi profile use, pneumatic exclusion from operator panel.
  • Corner Rounding / Multi Function Trimming Unit (AR34) :
    4-Motor for leading & trailing edges and or linear fine trimming. Automatic (2) position pre-sets, i.e. thin or 3 mm thick edge materials. Automatic pneumatic exclusion if not used. 
  • Profile Scraping Unit (RBK-503):
    Compact top & bottom with (2) programmable position and collection box.
  • Flat Glue Scrapers (RC20):
    Top/bottom to remove potential glue squeeze-out.
  • Buffing Unit (SZ30):
    Super imposed top/bottom, oscillating/tilting w/pneumatic exclusion control from control panel & 2 x 0.67 HP/0.5 KW - 1,400 RPM motors;
  • Hot Air Unit (PG-700):
    Top/Bottom hot air blowers to reactivate/smooth heavy pvc radiused edges.

    Complete With:
  • Motorized top pressure beam with powered V-belt holddown, 80 mm wide Heavy Duty feed chain w/rubber pads, 
  •  4 HP (3 kW) feed drive for feed variable speeds of 33 - 82 FPM (10 - 25 MPM). 
  • Electronic positioning by NC controller with Pneumatic Pre-set Stop System for most adjustments via the control panel on top & bottom trim, fine trim, and scraper station, electronic frequency inverter.
  • Electronic DC brakes on all trim motors, sound cabins for all trim work stations, outboard panel support,

    Actual Machine Model: ... STREAM B1 7.5 

    NOTE: (available at additional cost, ... ask for pricing)
    THOMAS, Return Conveyor "RH" matching the STREAM Edgebander, returns up to 48 x 96 x 1.5" panels automatically.
Special Note:
Comment: This BIESSE STREAM B1 7.5 Production Edgebander needs refurbishing!
*Dimensions: 0" L x 0" W x 0" H
*Weight: 0 Lbs
Written By: Karl Balg
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions