You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Karl Balg
(800) 374-5009 ext.  355
Intl. +1 (704) 841-2001
Karl.balg@exfactory.com





If not available, try his/her backup:
Bob Bullin ext 346
bob.bullin@exfactory.com


EXF #:   EO-012219  
Brand/Model:  

BIESSE STREAM B1

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2011
Condition:   As Is Condition   
Elect./Voltage:   220 V, 60 Cy, 3 Ph.
Value New: $ 210,000  
Price: $   40,000    Act Now!
Financing:   $ 814 National Capital Leasing
Region:   SOUTH (Click for Regional Map)

Description:

BIESSE STREAM B1 7.5  ... Edgebander with Pre-Mill & Corner Rounding:

Edge thickness cap. 0.01" - 0.8" (0.3 - 20 mm), min. panel width 2.5" (65 mm), panel thickness 0.4" - 2.4" (10 - 60 mm), min. panel length 6" (150 mm). 

Front-End Configuration:

  • Pre-Milling Unit with jump control & side copying unit for managing warped panels, 2-position in-feed fence, digitals readouts.
  • Pre-heating Section, infra-red, top & bottom lamps to pre-heat the panel edge.
  • Edge Magazine, automatic (2) coil vertical for coil material up to 3 mm thickness with automatic changeover. Solid Wood Edge Kit for up to 20 mm (3/4") thick straight edge-strip processing.
  • Glue System (SP20) EVA (Hot Melt) patented w/pre-melt, large separated granular hopper for easy filling & high gluing capacity,
    reversible glue roller applicator.
  • Side Pressure Section, (1) large inverter driven roller and (6) idle pressure rollers. servo motor, programmable positioning.

    Operator & Machine Control: 
  • "NC 410" Controller With: Graphic interface on MS-Windows XP Professional , 32-bit operating system;
  • High resolution LCD color screen unlimited" number of working programs, each with functions for remote control of processing units; fault diagnostic, bar code reader adaptable; etc. 

    Workstations:
  • End Trimming (IT90-S):
    Double motor front & rear linear end trimming unit (2 x 0.4 HP/0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting, 0° - 25° adjustable.
  • Pre/Rough Trimming (RS10):
    Top & bottom "RS 10" (1.75 HP/1.3 kW - 12,000 RPM motor ea.), pneumatic exclusion & positioning from control panel.
  • Radius/Bevel Trimming (RF40):
    Top & bottom (0.87 HP/0.65 kW - 12,000 RPM motor ea.), servo motor positioning allowing multi profile use, pneumatic exclusion from operator panel.
  • Corner Rounding / Multi Function Trimming Unit (AR34) :
    4-Motor for leading & trailing edges and or linear fine trimming. Automatic (2) position pre-sets, i.e. thin or 3 mm thick edge materials. Automatic pneumatic exclusion if not used. 
  • Profile Scraping Unit (RBK-503):
    Compact top & bottom with (2) programmable position and collection box.
  • Flat Glue Scrapers (RC20):
    Top/bottom to remove potential glue squeeze-out.
  • Buffing Unit (SZ30):
    Super imposed top/bottom, oscillating/tilting w/pneumatic exclusion control from control panel & 2 x 0.67 HP/0.5 KW - 1,400 RPM motors;
  • Hot Air Unit (PG-700):
    Top/Bottom hot air blowers to reactivate/smooth heavy pvc radiused edges.

    Complete With:
  • Motorized top pressure beam with powered V-belt holddown, 80 mm wide Heavy Duty feed chain w/rubber pads, 
  •  4 HP (3 kW) feed drive for feed variable speeds of 33 - 82 FPM (10 - 25 MPM). 
  • Electronic positioning by NC controller with Pneumatic Pre-set Stop System for most adjustments via the control panel on top & bottom trim, fine trim, and scraper station, electronic frequency inverter.
  • Electronic DC brakes on all trim motors, sound cabins for all trim work stations, outboard panel support,

    Actual Machine Model: ... STREAM B1 7.5 

    NOTE: (available at additional cost, ... ask for pricing)
    THOMAS, Return Conveyor "RH" matching the STREAM Edgebander, returns up to 48 x 96 x 1.5" panels automatically.
Questions? For Instant Communication, Click Here
Special Note:
Comment: This BIESSE STREAM B1 7.5 Production Edgebander needs refurbishing!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Karl Balg
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions