You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext 329

EXF #:   EO-012177  

HOMAG KAL 310/3/A3

Machine Type:  


Year of Mfg.:   2005
Condition:   Very good condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 145,000    Act Now!
Price: $   36,900 USD     (Convert)
Financing:   $ 751 National Capital Leasing
Region:   WEST COAST (Click for Regional Map)




  • Working Capacity:
    0.4 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm;

    Feed speed variable from 18 to 32 MPM (59' to 104' FPM). 

    Equipped with:  
  • 1-Coil tape magazine; SIKO digital adjustments.
  • Hot melt glue system "QA34" with reversible glue roller applicator; 
  • Pressure roll section with (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses. 

    Operator & Machine Control:
  • Line Control with HOMATIC "PC 21" controller features, function in Windows environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem.

  • End Trimming (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel.
  • Top & Bottom Trim station 1.0 kW (1.35 HP - 12,000 RPM).
  • Top & Bottom Buffing Unit,(0.25 kW - 2,850 RPM) each motor.

    Complete with & Features: 
  • Electronic DC brakes on all trim motors; sound cabin for all workstations.
  • Adjustable outboard panel support with swing out arms for up to 800 mm.
  • 80 mm Wide feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations. 
  • Actual Model is KAL 310/3/A3 (aka "TAPE ROCKET")

Questions? For Instant Communication, Click Here
Special Note:
Comment: A HOMAG "KAL 310" with RETURN, setup to run "tape" all day long!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions