You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Karl Balg
(800) 374-5009 ext.  355
Intl. +1 (704) 841-2001
Karl.balg@exfactory.com





If not available, try his/her backup:
Bob Bullin ext 346
bob.bullin@exfactory.com


EXF #:   EO-012153  
Brand/Model:  

BRANDT KDF 350 C

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2006
Condition:   Reconditioned   
Elect./Voltage:   380/400 V, 50/60 Hz, 3 Ph.
Value New:  
Price: Please Call    Act Now!
Financing:   National Capital Leasing
Region:   EUROPE (Click for Regional Map)

Description:

BRANDT KDF-350 C Edgebander with PRE-MILL & CORNER ROUNDING:
 
Specifications: 0.4 - 3 MM (0.125"), panel thickness 8 mm (0.31") - 55 mm (2.1"), min. panel length 160 mm (6 - 0.37") and 65 mm (2 - 0.5") min. width; PLC line control (no limit switches) for workstation function.

Infeed & Equipped with:

  • Pressure beam height adjustment for all work stations via digital height indicator.
  • Programmable Controller with large, userfriendly operator control panel; features integrated 7-0.5" VGA screen, 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link.
  • Features: Signal infeed light to insure proper spacing between panels and a panel edge pre-heating system.
  • Equipped with: (2) Motor Pre-milling (3 HP- 12,00 RPM);
  • Hotmelt granulate glue application system with approx. 10 Min heat up time; automatic reduction of glue temperature when idle more than 5 Min.
  • Automatic magazine for strip & coil (large coil table 800 mm dia. to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine, (1) drive plus (1) split secondary roller "pneumatically controlled" pressure sections.

    Edgebanding Workstations:
  • End trim (0.33 HP - 12,000 RPM motor ea.), chamfers 0° - 15°, program controlled from straight to bevel.
  • Top & bottom flush/bevel/radius trim, bevels 0° - 15° (0.5 HP - 12,000 RPM motor ea.), with insert knives for 3 mm PVC radius.
  • 1-Motor corner rounding unit for top & bottom corners (0.5 HP - 12,000 RPM motor).
  • Top & bottom scraping for 2 - 6 mm radius, pneumatically controlled blowoff nozzles and program controlled indexing.
  • Last Station: Top & bottom buffing (0.25 HP - 1,400 RPM motors).

    Note:  EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistic” from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.

    Features & Feed:
  • End trim, flush trim and corner round stations have HF motors w/electronic brakes; 200 Hz Electronic frequency inverter.
  • Feed chain track speed 36 FPM with 2 HP feed drive; workpiece support track extends up to 19-0.5".
  • Complete with: Operator control panel w/PLC (Programmable Logic Control), keypad & 7-0.5" screen, "see-through" sound & safety enclosure, and used tooling.
  • Actual Model is BRANDT KDF-350 C

    Note:
    EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistic” from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.
Questions? For Instant Communication, Click Here
Special Note:
Comment: Reconditioned BRANDT edgebander with Premilling & Corner rounding!
*Dimensions: 188" L x 36" W x 69" H
*Weight: 4,180 Lbs
Written By: Victor Jimenez
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions