You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com





If not available, try his/her backup:
Louis Sicotte ext 329
louis.sicotte@exfactory.com


EXF #:   EO-011969  
Brand/Model:  

HOLZ-HER 1448 ACCORD

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:  
Condition:   Very good condition   
Elect./Voltage:   380/400 V, 50 Cy, 3 Ph.
Value New: € 110,000    Act Now!
Price: €   26,820 EUR     (Convert)
Financing:   € 545 National Capital Leasing
Region:   SPAIN (Click for Regional Map)

Description:

Granulate glue system with selector switch to direct glue extrusion either to the workpiece or to the edge material, up to 25 mm (approx. 1") solid wood banding & 3 mm PVC capacity.

  • Equipped with: Automatic magazine for coil, strip & solid edgebanding; HD guillotine for 3 mm PVC.
  • Pressure section with (3) large dia. rollers, each w/individual pneumatic plunge & pressure control, powered 1st roller w/electronic speed control synchronized with chain feed speed.
  • Workstations: Pre milling station with: (2) 2.0 kW (2.6 HP) 9,000 RPM motors.
  • Double motor end trim (1 HP - 5,500 RPM ea.), adjustable 0 - 10° for chamfer cuts; top & bottom flush trim unit (2.7 HP - 200 Cy HF-motors), SIKO digital readouts. Top & bottom fine trim unit (1.1 HP - 200 Cy HF-motors), bevels 0 - 45°, SIKO digital readouts.
  • Corner rounding units for top & bottom of leading & trailing corner when edgebanding all four sides (4 motors, 0.6 HP - 200 Cy ea.), SIKO digital readouts.
  • Flush trimming and chamfering (2 motors, 1 HP - 200 Cy ea.) tiltable 0 - 45°.
  • Top & bottom profile scrapers for up to 3 mm thick PVC banding, radius range from 0.8 - 5 mm, vertical & horizontal tracing shoes, SIKO readouts for easy set-up, overhead PVC filter unit eliminates PVC chips being sucked in by dust collector.
  • Top & bottom jump buffing unit (0.7 HP - 2,600 RPM ea.), tilts 0 - 30°. Variable feed speed 12 - 24 MPM. (39 - 78 FPM), panel overhang beyond chain 35 mm (1.38").
  • Complete with: MICROPROCESSOR for line control and glue temperature & flow, PCS for remote control panel setting of "radius or fine trim", 20 KVA Frequency changer, out board panel support and sound enclosure w/interior lights over all milling units.
Questions? For Instant Communication, Click Here
Special Note: S O L D
Comment: A really well equipped & maintained "large" HOLZ-HER w/ Pre-milling and Corner Rounding!
*Dimensions: 360" L x 50" W x 79" H
*Weight: 7,668 Lbs
Written By: Karl Balg
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions