You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals. We are awaiting literature from the principals.

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext.  349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Louis Sicotte ext 329
louis.sicotte@exfactory.com


EXF #:   EM-010140  
Brand/Model:  

MPB EM-8

Machine Type:  

END MATCHER

Year of Mfg.:   2007
Condition:   Good Condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 54,900    
Price: $ 17,700 USD     (Convert)
Financing:   $ 360 National Capital Leasing
Region:   WEST COAST (Click for Regional Map)

Description:

MPB EM 8" End Matcher: 

Working dimensions: Width 1.5" to 8"; thickness 0.4" to 1.37" and length from 11" to 20'.

Spindles:

  • (2) with 40 mm dia. 7,200 RPM powered by (2) 5 HP motors. Will machine tongue & groove with or without V's on flooring & panel product; designed to be used for finger joint cutting.
  • QUICK AND EASY SETUP: No need for measurements or readouts, simply adjust the height, using the thickness setting guides, and the width, and if required, the backup blocks. In less than a few minutes the job will be done

    Feed control:
  • 1 HP Feed motor, 295 FPM (90 MPM) via (5) top powered rolls & (5) bottom idle bed rolls; processing speed based on 6' average length incoming boards is 78 FPM (24 MPM). Stock held securely for accurate profiling during the machining cycle by top & side clamps.
  • Heavy Duty self-supporting main frame; compact design requires minimum floor space;
  •  Variable speed through feed system is controlled by frequency inverter.
  • Through feed system allows the tongue to be cut simultaneously on the tail of one board and the leading edge of the next board.
  • Powered top urethane feed rolls & spring loaded bed rollers feed the material into position for processing.
  • Pneumatic side pressure system ensures the material is held square against the fence; with safety and noise reduction enclosure.

    Touchscreen Display:
  • Conveniently located at the front of the machine the touch screen allows the operator to read and adjust cut, feed and clamping parameters, view error messages, and operate the machine manually.
  • Integrated PLC Controls: All controls are positioned at the front of the machine in an easily accessible location. Controls are kept very simple and easy to operate and are explained on the Touch screen display. 
  • The display tells the operator what to do! While 'behind the scenes' is an integrated PLC circuit, internet compatible - allows for remote diagnostics via the internet.is used to quickly activate and adjust the machine functions and allows for automatic operation via included PLC.
  • PLC Controlled twin cutters and dual action clamping system produce a square cut.

    Includes: A 9' canted powered infeed roll conveyor, outfeed landing table and (1) set of TCT carbide tools.
Special Note: S O L D
Comment: Great END MATCHER for 1/3 the cost of new!
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Jeff Terrill
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions