A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning. They are used in the manufacture of cylindrically shaped products. In the case of larger pieces, steady rests may be used to support the workiece. Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks. They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry. 
ACRA 1440A Geared Head Engine Lathe Swing over bed 14".
Distance between centers 40".
Swing over cross slide 6.6".
Swing in gap 19.92".
Spindle hole diameter 1.5".
Spindle type D1-4
Spindle taper 5MT.
Spindle speeds (16) 45-1800 RPM.
Cross slide travel 6.3".
...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA 1440C Precision Engine Lathe Swing over bed 14"
Swing over cross slide 8.625
Distance between centers 40"
Swing in the gap 20"
Spindle bore 1.5"
Spindle nose D1-4
Spindle speed (8) 80 - 2000 RPM
Main motor 5 HP
Machine dimensions 83" x 34" x 50"
...
Read More
Year of Mfg: 2022
Cond: Brand New w/Warranty
NEW
|
|
Acra 1440 TE Manual Lathe
Specifications:
Swing over bed: 14-3/16"
Swing over cross slide: 8-3/8"
Distance between centers: 40"
Swing in gap: 21"
Spindle bore: 2-1/16"
Spindle nose: D1-6
Spindle speed: 1,800 RPM
Spindle motor: 5 ...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
Acra 1440 TVS Manual Lathe
Specifications:
Swing over bed: 14-3/16"
Swing over cross slide: 8-3/8"
Distance between centers: 40"
Swing in gap: 21"
Spindle bore: 2-1/16"
Spindle nose: D1-6
Spindle speed: 2,500 RPM
Spindle motor: 5...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA 1660TE Precision Gap Bed Lathe Swing over bed 16.187"
Swing over cross slide: 10.375"
Swing in gap 23"
Center distance 60"
Spindle bore: 2.06"
Spindle nose: D1-6
Spindle RPM: 36 – 1800 (12 Speeds)
Main motor 5 HP
Machine weight 3,900 Lbs
Equipped...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA 1760TE Precision Gap Bed Lathe
Swing over bed 17"
Swing over cross slide: 10 7/8"
Swing in gap 24 7/16"
Center distance 60"
Spindle bore: 3 1/8"
Spindle nose: D1-8
Spindle RPM: 26 – 1500 (12 Speeds)
Main motor 10 HP
Equipped with:
10" 3-Jaw chuck
...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA 2160TE Precision Gap Bed Lathe Swing over bed 21.34"
Swing over cross slide: 15.23"
Swing in gap 28.74"
Center distance 60"
Spindle bore: 3.149"
Spindle nose: D1-8
Spindle RPM: 26 – 1500 (12 Speeds)
Main motor 12.5 HP
Machine weight 4972 Lbs
Equi...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA 26X160ACH Precision Engine Lathe
Swing over bed 26"
Swing over cross slide 17 1/2"
Swing In gap 35 1/8"
Center distance 160"
Spindle bore 4 1/16"
Spindle nose D1-11
Spindle RPM 13-1200 (12 speeds)
Main motor 15 HP
Machine weight 8,450 Lbs
Equipped with:
...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA SET-32120 Engine Lathe Swing over bed 32.67"
Swing over cross slide 23.62"
Swing in gap 43.3"
Distance between centers 120"
Spindle bore 6.02"
Spindle nose A2-11
Spindle RPM 15 - 1000
Main motor 25 HP
Equipped with:
Full length rear splash guard...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA SET-32160 Engine Lathe Swing over bed 32.67"
Swing over cross slide 23.62"
Swing in gap 43.3"
Distance between centers 160"
Spindle bore 6.02"
Spindle nose A2-11
Spindle RPM 15 - 1000
Main motor 25 HP
Equipped with:
Full length rear splash guard...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA SET-36120 Engine Lathe
Swing over bed 36"
Swing over cross slide 27"
Swing in gap 48"
Spindle bore 6"
Spindle nose A2-11
Spindle RPM 15 - 1000
Main motor 25 HP
Equipped with:
NEWALL digital readout
Full length rear splash guard
Coolant syst...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA SGT-45240 Heavy Duty Engine Lathe
Swing over bed 45.67"
Swing over crosslide 33.46"
Swing in gap 66.93"
Spindle bore 6.02"
Spindle nose A2-11
Spindle speed 3-300 RPM
Main motor 30 HP
Machine weight 29,320 Lbs
Equipped with:
Halogen work l...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
ACRA SGT-51120 Large Bore Gap Bed Engine Lathe
Swing over bed 51".
Swing over cross slide 40".
Swing over gap 72".
Width of gap 26".
Distance between centers 120".
Spindle bore 9".
Spindle nose A2-15.
Spindle taper MT6.
Cross slide travel 25".
Spindle speed (1...
Read More
Year of Mfg: 2021
Cond: Brand New w/Warranty
NEW
|
|
AMERICAN 25" x 312" Manual Engine Lathe - cleaned, painted and cycled since removal from plant in December 2013. Specifications...
Read More
Comment: AMERICAN "Engine Lathe", a lot of equipment value for the mon...
Year of Mfg: 1951
Cond: Cleaned and checked
|
|
BINNS & BERRY MARKIII-TB 25"/46" X 109" Gap Bed Lathe
Specifications: Swing over bed ways gap closed max. 25"
Swing through the gap max. 46"
Gap length 11.625"
Distance between centers 120"
Swing over cross slide max. 15"
Spindle Bore...
Read More
Year of Mfg: 1968
Cond: Good Condition
|
|
CLAUSING-COLCHESTER 21 Engine Lathe Swing over bedways 21"
Swing over cross slide 14"
Distance between centers 100"
Spindle speeds 24 - 1400 RPM
Spindle bore 3-1/2"
Main motor 12.5 HP
Machine dimensions approx 160″ x 48″ x 60″
Machine w...
Read More
Year of Mfg:
Cond: Good Condition
SOLD
|
|
CLAUSING-COLCHESTER 21 Engine Lathe Swing over bedways 21"
Swing over cross slide 14"
Distance between centers 100"
Spindle speeds 24 - 1400 RPM
Spindle bore 3-1/2"
Main motor 12.5 HP
Machine dimensions approx 160″ x 48″ x 60″
Machine w...
Read More
Year of Mfg:
Cond: Good Condition
SOLD
|
|
CLAUSING-COLCHESTER 21 Engine Lathe Swing over bedways 21"
Swing over cross slide 14"
Distance between centers 100"
Spindle speeds 24 - 1400 RPM
Spindle bore 3-1/2"
Main motor 12.5 HP
Machine dimensions approx 160″ x 48″ x 60″
Machine w...
Read More
Year of Mfg:
Cond: Good Condition
SOLD
|
|
CLAUSING-COLCHESTER 21 Engine Lathe Swing over bedways 21"
Swing over cross slide 14"
Distance between centers 100"
Spindle speeds 24 - 1400 RPM
Spindle bore 3-1/2"
Main motor 12.5 HP
Machine dimensions approx 160″ x 48″ x 60″
Machine w...
Read More
Year of Mfg:
Cond: Good Condition
SOLD
|
|
CLAUSING-COLCHESTER 21 Engine Lathe Swing over bedways 21"
Swing over cross slide 14"
Distance between centers 100"
Spindle speeds 24 - 1400 RPM
Spindle bore 3-1/2"
Main motor 12.5 HP
Machine dimensions approx 160″ x 48″ x 60″
Machine w...
Read More
Year of Mfg:
Cond: Good Condition
SOLD
|
|
HARDINGE HC Precision Chucker Lathe
Specifications: Round 5C collets 11/16"
Hexagon 5C collets 7/8"
Square 5C collets ¾"
5C step chucks 11/16" to 6"
Jaw chucks 6"
Jaw chucks (through spindle) 15/32"
Spindle nose diameter 2.189"
...
Read More
Year of Mfg:
Cond: Good Condition
|
|
LEBLOND 1610 Heavy Duty Engine Lathe Swing over bed 16”
Swing over cross slide 10".
Max center distance 60"
Spindle nose D1-6
Spindle bore 1-3/4"
Spindle s...
Read More
Year of Mfg:
Cond: Good Condition
|
|
LEBLOND 3230-25 Heavy Duty Engine Lathe
Specifications: Swing over bed: 36.5"
Swing over cross slide: 25"
Distance between centers 96"
Spindle speeds 10 - 1300 RPM
Spindle center to floor 49-13/16”
Spindle nose D1-8
Center size # 5 Morse
&nbs...
Read More
Year of Mfg: 1978
Cond: Good Condition
|
|
LEBLOND 4025NK Heavy Duty Sliding Bed Gap Lathe Swing over bed and carriage wings 34 1/2".
Swing over cross slide 23 1/2".
Swing over gap 130".
Distance between centers, bed closed 132".
Distance between centers, bed opened 216".
(36) Spindle speeds, in 3 ranges 4.5...
Read More
Year of Mfg:
Cond: Very good condition
SOLD
|
|
LEBLOND Regal 15 x 40 Engine Lathe
Specifications: Swing over bed 15”
Swing over cross slide 9"&n...
Read More
Comment: Might be older than you, but there is a lot it can do!
Year of Mfg: 1963
Cond: Good Condition
|
|
LODGE & SHIPLEY 2013 Engine Lathe
Specifications: Swing: 25"
Swing over cross slide: 20.5"
Distance b...
Read More
Comment: A machine in this condition and specification is hard to find...
Year of Mfg:
Cond: Very good condition
|
|
LODGE & SHIPLEY 2XE 3220 Engine Lathe
Specifications: Swing over cross-slide: 20”
Width of b...
Read More
Comment: A Machine like this doesn't come on the market often!
Year of Mfg: 1976
Cond: Good Condition
|
|
MIGHTY USA 56" x 200" MIGHTY TURN 56 Engine Lathe
Specifications: Swing over ways: 56"
Sw...
Read More
Comment: A lot of machine & equipment value for the money!
Year of Mfg:
Cond: Good Condition
|
|
Niles Manual Lathe
Specifications:
Spindle motor: 30 HP, GE motors
Chuck size: 42"
Swing over bed: 64"
Equipped with:
All original blueprints and paperwork
Two Steady rests
Read More
Year of Mfg: 1944
Cond: Fair Condition
|
|
O-M VT16 63" Vertical Turret Lathe
Specifications: 63” Diameter 4-jaw table w/jaws
Max. swing 75”
Max. height rail 59”
5 Position turret head on rail
Table speeds from 3.6 to 200 RPM
15/30 HP 220 Volt
No pit required
Equipped with...
Read More
Year of Mfg: 1971
Cond: Very good condition
|
|
POREBA 93X600 Engine Lathe Swing over bed 40"
Swing over gap 48"
Distance between centers 264"
Spindle speeds 9 - 900 RPM
Diameter thru hole 4"
Equipped with:
Acu-rite Digital Readout
32" 4-jaw chuck
Read More
Year of Mfg: 1977
Cond: Good Condition
|
|
STANKO 1A983 Big Bore Engine Lathe
Specifications: Swing over carriage: 17.72"
Distance between centers: ...
Read More
Comment: A machine in this condition and specification is hard to find...
Year of Mfg: 1998
Cond: Very good condition
|
|
VDF WOHLENBERG W57V Engine Lathe
Specifications: Swing over bed: 53"
Swing over cross-slide: 40"
 ...
Read More
Comment: A lot of machine & equipment value for the money!
Year of Mfg:
Cond: Good Condition
|
|
West Bend "AS & BEAD" Spinning and Bead Forming Lathe
MAXIMUM SWING: 30"
DISTANCE BETWEEN HEADS: 0-30"
DIMENSIONS: 110" x 50" x 72"
WEIGHT: 8,500 lbs.
Equipped With:
AUTO CYCLE HYDRAULICS
POWER TAIL STOCK WI...
Read More
Year of Mfg:
Cond: Good Condition
|