SCHELLING FXH 330/310 FRONT LOAD, AUTO. PANEL SAW: ; Specifications:
129.9" (3,300 mm) Cutting length & & 122" (3,099 mm) pull b...
Read More
Comment: One of the best bullt used panel saw avalible.
Year of Mfg: 2007
Good Condition
FEATURED
|
|
SCMI SI 300 NOVA Sliding Table Panel Saw
Specifications & Features: ; 120" Stroke and with scoring, telescoping crosscut fence with panel support, and back squaring fence (2) flip-stops; miter gauge with (2) stops; 3/4" dado capacity. ; Equipped with: ; 9 HP Main blade motor, 1 HP scoring blad...
Read More
Year of Mfg:
Excellent condition
|
|
LEGACY MAVERICK CNC 4 X 8 with ATC and 4th axis rotary lath:
49" X 97" Stationary table, moving gantry machine in a front-to...
Read More
Comment: LEGACY MAVERICK CNC 4 X 8 with ATC and 4th axis rotary lath!
Year of Mfg: 2020
Very good condition
FEATURED
|
|
MONGUZZI PULCHRA 45-3400 ...Double-Knife Jointing Guillotine with integral Glue Applicator on b...
Read More
Comment: Italian made Monguzzi is the Cadillac of veneer processing ma...
Year of Mfg: 2009
Reconditioned
|
|
SCHMALZ JUMBO ERGO 110 Vacuum Lift
Vacuum lifting for panels in horizontal orientation to reduce potential injury to employees. Suitable for diverse loads such as sheets of particle board, plywood, glass, steel, plastic. ; Lifting capacity; 240 Lbs non-porous materials without reduction in perfo...
Read More
Year of Mfg: 2016
New, Never Used
FEATURED
|
|
TAKEKAWA RG-30S Straight Line Rip Saw
Specifications; 15 HP - 5,000 RPM Belt driven arbor, overhead arbor design,; 1-1/4"...
Read More
Comment: There is still a lot of life in this Workhorse
Year of Mfg: 1981
Good Condition
|
|
LOEWER MINISPIN PROFILE SANDER
For wood and finish sanding of straight and profiling edges
The workpiece is manually passed ...
Read More
Comment: Well maintained and light use.
Year of Mfg: 2011
Very good condition
FEATURED
|
|
WADKIN GA-111 5 Head Through Feed Moulder
5 Heads 7" x 5-1/8" cap.
Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5...
Read More
Comment: This is a nice looking starter moulder, do not hesitate
Year of Mfg: 1981
Good Condition
|
|
SCMI PRATIX 48 NST FLAT TABLE MACHINE (W/ATC/BORING):
4' x 8' Stationary aluminum table, machined with a "MATRIX" grid pattern ...
Read More
Comment: SCMI PRATIX 48 NST FLAT TABLE MACHINE (W/ATC/BORING)!
Year of Mfg: 2006
Good condition
FEATURED
|
|
GUOSEN GS600A2 2-Lamp UV oven, 24" Width Capacity
Equipped with (2) 24" long Mercury UltraViolet Lamps.
Specifica...
Read More
Comment: Very little use great value on this UV oven.
Year of Mfg: 2010
Very good condition
|
|
ALLTIME MODEL NORSEMAN EM300 END MATCHER
Capacities: 1.6" to 12" width x 0.4" to 1.38" thickness (to 2-1/4" optional) x 10.6" m...
Read More
Comment: This is as nice an End Matcher as any used machinery you'll f...
Year of Mfg:
Very good condition
|
|
HEESEMANN MFA 8 CSD 1-Head Wide Belt Sander Model MFA 8 CSD + Scotch Brite roll and Panel Cleaning.
Equipped with sanding plate...
Read More
Comment: Built like tank and in very good condition.
Year of Mfg: 2001
Very good condition
FEATURED
|
|
ROACH 36" WIDE Slider Bed Conveyor
Specifications: ; Length: 16' ; Belt Width: 36" ; Height: 26".
Includes: 1.5 HP drive motor
Read More
Year of Mfg:
Good Condition
|
|
BROWNING 24" WIDE Slider Bed Conveyor
Specifications: ; Length: 20' ; Belt width: 24" ; Height: 2...
Read More
Comment: OPEN TO OFFERS!
Year of Mfg:
Good Condition
|
|
HOMAG FL 20/06/15 Double End Tenoner
NC Controlled Tenoner, 84" motorized programmable opening with LED readout, 8-5/8" min. open...
Read More
Comment: Older model but built to last
Year of Mfg: 1996
Good Condition
|
|
WEINGI U 500 Feed Through Moulder; 5-Head (B-R-L-T-B) version, 9-1/16" x 4-3/4" capacity. ; Head sequence: Bottom 10 HP, right / ...
Read More
Comment: Very good condition. We only used it to run one profile appro...
Year of Mfg: 2006
Very good condition
FEATURED
|
|
ANDI STRATOS PRO CNC Router - 5 X 12 with ATC & Boring very low hours:
5' x 12' Moving gantry, stationary table design in a fro...
Read More
Comment: ANDI STRATOS PRO CNC Router - 5 X 12 with ATC & Boring very l...
Year of Mfg: 2007
Excellent condition
FEATURED
|
|
SCMI SIGMA 90 Plus Front Load Auto. Panel Saw; CONDITION: REQUIRES REPAIR; THIS MACHINE DOES NOT CURRENTLY WORK. ; Nearly all of the contactors / relays on the electrical panel are brand new from manufactuer. The new contactor replacements kept the machine going for a while. There is currently a pro...
Read More
Year of Mfg: 1999
|
|
WEEKE BP 85 CNC MACHINING CENTER (W/ATC)
Specifications:
Work area cap.: "X" axis 122" (3,105 mm"), "Y" axis 40" (1,020 mm), "Z" axis stroke is 5.3" (135 mm), 2.36" (60 mm) max. material thickness. ; Positioning Speed:
"X" axis is 213 FPM (65 MPM), "Y" axis 164 FPM ((50 MPM) & ...
Read More
Year of Mfg: 2000
Good condition
|
|
KOCH SPRINT PTP-BASIC, ... CNC Bore, Glue & Dowel Inserter.
Specifications: ; Working Capacity: Stock width ("X" axi...
Read More
Comment: Under Power & available for inspection...it's like NEW & read...
Year of Mfg: 2019
Like New
FEATURED
|
|
GRECON MODEL RESTOMAT 2 Vertical and Horizontal Finger Jointer ; Machines a wide array of vertical and horizontal finge...
Read More
Comment: The perfect entry level Finger Jointer to get into the finger...
Year of Mfg: 1995
Good Condition
|
|
GIBEN KG450DJ EDGEBANDER (W/ PRE-MILL & CORNER ROUNDING):
Specifications: ; Working Capacity:
0.4 - 3 mm Edge thickness capac...
Read More
Comment: Seller States "Pre Melt is not functioning properly & the Glu...
Year of Mfg: 2014
Good Condition
FEATURED
|