A turning center is a CNC controlled lathe. Like most lathes, the workpiece is held by a chuck or collet, but the movement is computer controlled to ensure higher accuracy and efficiency. The ability to program gives turning centers more versaility and efficiency than manual tool room and engine lathes can. Some turning centers are further augmented with twin or sub spindles and and two turrets so that a workpiece can be machined on multiple faces, providing great savings in terms of setup time and efficiency. The work that might require multiple machines and extra setups can be done with a single machine tool.
Doosan PUMA 2000LSY Turning Center
Specifications: Maximum swing 23.6"
Max. cutting diameter: 13"
Max...
Read More
Comment: One of the "Best Buys" we have ever seen on this model!
Year of Mfg: 2010
Cond: Very good condition
|
|
DOOSAN PUMA 480XL CNC Turning Center
The 480XL is a heavy duty turning center capable of handling bar work over 6" diamete...
Read More
Comment: A lot of machine & equipment value for the money!
Year of Mfg: 2009
Cond: Good Condition
|
|
DOOSAN V450TM Twin Spindle CNC Vertical Turning Center
Specifications: Max swing 22.83"
Chuck size (2) 15"
Max. turning diameter 17.72"
Max. turning length 17.72"
X-Axis travel 9.45"
Z-Axis travel 17.7"
Rapid traverse rate 787 IPM
Spindle center he...
Read More
Year of Mfg: 2005
Cond: Very good condition
|
|
GILDEMEISTER Mf Sprint 42 Multi-Axis CNC Turning Center
Main Spindle:
Bar Diameter 1.654" (42mm)
Spindle Hole Diameter 2.205"
Main Drive:
Max. Drive Rating 25.5 / 18.8 HP
Rotational Speed Range 31-6300 RPM
Max. Torque 133/99 Ft / Lb
Speed Of C-Axis 120 RPM
C-Axis Torq...
Read More
Year of Mfg: 2000
Cond: Very good condition
|
|
HAAS SL-30T CNC Turning Center
Specifications: Swing Over Front Apron: 30"
Swing Over Cross Slide: ...
Read More
Comment: A machine in this condition and specification is hard to find...
Year of Mfg: 2006
Cond: Good Condition
|
|
JOHNFORD ST-40G-CF Big Bore CNC Turning Center Swing over bed 36.22"
Swing over cross slide 27.55"
Chuck size &nbs...
Read More
Comment: Under 5,000 hours!
Year of Mfg: 2007
Cond: Very good condition
|
|
MORI SEIKI NT3100/500CZ CNC Turning Center with Live Tooling / Milling
Specifications: Max. turning diameter: 24"
...
Read More
Comment: Machine is from a school setting and has only 3 hours cutting...
Year of Mfg: 2005
Cond: Good Condition
|
|
NAKAMURA-TOME SC-250 Turning Center
Specifications: Turning diameter: 11.8”
Machining length: 19.7&rdqu...
Read More
Comment: A great starter machine.
Year of Mfg: 2005
Cond: Good Condition
|
|
WEILER E70 CNC Teach & Learn Engine Lathe Center distance 118”.
Height of centers 14”.
Swing over bed 28”.
Swing over cross slide 17”.
Width of bed 19”.
Travel of cross slide 16”.
Travel of top slide ...
Read More
Year of Mfg: 1998
Cond: Good Condition
|