Used and New Equipment For Sale

All Equipment: FRAME (PICTURE) EQUIP. - 81 Listings

Refine search criteria by manufacturer, condition and region below.

Product Manager
Kasha Kuhlman
Ext. 463

F
E
A
T
U
R
E
D

2009 BREVETTI VEGA SE

TRIAD CN-1

(8) New ones to choose from!

1993 AMP INTERNATIONAL SPEED NAILER 200

View Last Week's Featured Machines

Page 1 Of 3 Total

View All Listings Sort By Price

Page 1 Page 2 Page 3

EX-FACTORY #

Brand / Model / Machine Type

Photos / Literature

FM-010033	AMP "SPEED NAILER " ...NAILER
$ 1,995	Pneumatically presses a nail into back side of moulding, designed for 1/2" to 6" frame width cap., 3/8" to 6-1/2" frame height cap. will accommodate c... Click for more.
	Cleaned and checked	Year:
Southeast	Was previously listed in "As-Is" condition, but now has been cleaned and checked. New photos not yet available.	Photos / Lit.

FM-010004	AMP INTERNATIONAL "SPEED NAILER 200 " ...NAILER
$ 2,900	Pneumatically presses a nail into back side of moulding, designed for 1/2" to 6" frame width cap., 3/8" to 6-1/2" frame height cap. will accommodate (... Click for more.
	Very good condition	Year: 1993
Northwest	This Nailer is in perfect condition; used for (10) Hrs only!	Photos / Lit.

FM-010021	BREVETTI "AUT87 " ...MITER JOINING MACHINE
$ 1,350	1/4" - 5/8" Nail length, moulding width from 3/8" min. - 3" max., 3/8" min. - 2" max. moulding height, 3" x 3" min frame size. ; Clamp pressure adjus... Click for more.
	As-Is, good or bad	Year:
Northwest	A well maintained Vee-Nailer from one of the best names in the business!	Photos / Lit.

FM-010043	BREVETTI "AUTO-82 " ...MITER JOINING MACHINE
$ 3,650	Pneumatically presses a nail into back side of moulding (use NR type nail - works best in hardwoods); NR nails are 12 mm wide and comes in lengths of ... Click for more.
	Cleaned and checked	Year:
Southeast	Gone through & checked; complete and in good operating condition!	Photos / Lit.

FM-010045	BREVETTI "B-84 " ...DOUBLE MITER SAW
$ 1,150	For cutting 45° - 30° or 22.5° miters, cuts both ends of the moulding or frame part; saw blade dia. 12"; cutting cap. is 3-3/4" in height x 3-1/8" in ... Click for more.
	Fair Condition	Year:
Midwest	Double Miter Cutting at a fraction of it's replacement cost!	Photos / Lit.

FM-010009	BREVETTI "B-84 " ...DOUBLE MITER SAW
$ 7,250	For cutting 45° - 30° or 22.5° miters, cuts both ends of the moulding or frame part; saw blade dia. 12"; cutting cap. is 3-3/4" in height x 3-1/8" in ... Click for more.
	Very good condition	Year: 1995
South	Well maintained, great looking machine; available immediately!	Photos / Lit.

FM-010040	BREVETTI "C 16 " ...DOUBLE MITER SAW
$ 19,050	Electro-Pneumatic Double Miter Saw. (2) 2 HP Motors belt driven to saw arbors, 13-3/4" (350 mm) max. dia. of saw blades, 32 mm bore, 108 tooth, 3-1/2"... Click for more.
	Brand new with warranty	Year: 2009
Southeast	Precision made and designed for the framing industry.	Photos / Lit.

FM-010078	BREVETTI "PRISMA " ...DOUBLE MITER SAW
$ 2,500	Electric/Manual Double Miter Saw. Production capacity of (50+) frames per day make this an ideal choice for the shop producing low volume, high-end in... Click for more.
	Good condition	Year:
West Coast	This may be an older frame saw but This is a Great price!	Photos / Lit.

FM-010103	BREVETTI "PRISMA CE " ...DOUBLE MITER SAW
$ 4,200	Electric/Manual Double Miter Saw. Production capacity of (50+) frames per day make this an ideal choice for the shop producing low volume, high-end in... Click for more.
	Very good condition	Year: 1998
South	Motivated seller is upgrading, says "Make me a reasonable offer!"	Photos / Lit.

FM-010085	BREVETTI "PRISMA CE " ...DOUBLE MITER SAW
$ 4,875	Electric/Manual Double Miter Saw. Production capacity of (50+) frames per day make this an ideal choice for the shop producing low volume, high-end in... Click for more.
	Excellent condition	Year: 2003
Southwest	A must have piece of equipment for any serious custom picture frame shop!	Photos / Lit.

FM-010041	BREVETTI "PRISMA CE " ...DOUBLE MITER SAW
$ 6,950	Electric/Manual Double Miter Saw. Production capacity of (50+) frames per day make this an ideal choice for the shop producing low volume, high-end in... Click for more.
	Brand new with warranty	Year: 2009
Southeast	Quantity, quality , long-lasting!	Photos / Lit.

FM-010042	BREVETTI "VEGA SE " ...DOUBLE MITER SAW (MULTI ANGLE)
$ 23,995	Electro-Pneumatic Multi Angle (22.5°, 30° and 45°) Double Miter Saw. Angle changing with the turn of a switch, swinging cutting heads. (2) 2 HP Motors... Click for more.
	Brand new with warranty	Year: 2009
Southeast	Quick and easy adjustment between profiles.	Photos / Lit.

FM-010101	C T D "D 45FX " ...DOUBLE MITER SAW
$ 4,250	12" Blade capacity, 5-3/4" maximum width & 3-1/4" max. height. (2) 1-1/2 HP motors, belt driven saw arbors are fixed at 45°. Pneumatically operated sa... Click for more.
	Very good condition	Year: 2005
Great Plains	This machine is approx. (4) years old, in storage for (1) year.	Photos / Lit.

FM-010090	CASSESE "CS 89 PREMIUM " ...UNDERPINNER
$ 1,950	Excellent for picture frames. Accomodates mouldings 7/32" - 3-3/4" wide x 9/32" - 3-11/32" high. Wedge sizes 5,7,10,12 & 15mm. ; Include: (4) unopene... Click for more.
	Reconditioned	Year: N/A
Southeast	Motivated seller had sold property and needs to move out all equipment ASAP!	Photos / Lit.

FM-010100	DELTA "AP400 " ...DUSK COLLECTOR
$ 250	DELTA Shopmaster Dusk Collector AP400. ; 1 HP, 650 CFM, vertical bag dust collector. Click for more.
	Very good condition	Year:
Southeast	Great working condition.	Photos / Lit.

FM-280003	EASTEY "ET 1610-36 " ...Heat Tunnel
$ 3,780	Shrink Tunnel and Knife has an operating capacity of 3.5 in. x 5 in. - 16 in. x 2 in. Click for more.
	Fair condition	Year: 1996
Southwest	A versatile system used for shrink wrapping picture frames!	Photos / Lit.

FM-010095	FLETCHER "5100 " ...THUMBNAILER
$ 1,100	5100 Pneumatic V-Lock Underpinner. Display/demo model - never used in frame shop so driver has no wear. ; Includes: all original accessories, selecti... Click for more.
	Very good condition	Year:
Pacific Northwest	Motivated seller had sold property and needs to move out all equipment ASAP!	Photos / Lit.

FM-010091	FLETCHER "CORNERLOCK 4000 " ...THUMBNAILER
$ 850	CorCornerLock Joiner routs out a specially shaped slots in the end of each pair of mitred mouldings, from 1/2" (13 mm) up 3-1/2" (89 mm). ; They are ... Click for more.
	Like New	Year:
Pacific Northwest	Nearly new - Very little use!	Photos / Lit.

FM-010077	FRAME HANGER MACHINE "AHM-01 " ...ATTACHES HANGERS TO PICTURE FRAMES
$ 3,000	THE AHM-01 MACHINE ELECTRO NEUMATICALLY ATTACHES THE HANGER TO THE PICTURE FRAME Click for more.
	Good condition	Year: 1994
Mexico	A Great Value for the money!	Photos / Lit.

FM-010094	ITW "VN " ...MANUAL UNDERPINNER/V-NAILER
$ 950	Entry level assembly machine for the lower production frame shops. ; Does not require a compresser or electricity. ; V nails driven by foot power, c... Click for more.
	Very good condition	Year:
Northeast	Lightly used ... less than 100 frames total.	Photos / Lit.

FM-010089	JYDEN "F " ...DOUBLE MITER GUILLOTINE
$ 990	Max. moulding width at 45° 4" (100 mm), max. cutting height 6-1/3" (160 mm) and 2-1/2" (65 mm) square cutting capacity. ; Equipped with: Tiltable fen... Click for more.
	Very good condition	Year: N/A
Midwest	A Great Value for the money!	Photos / Lit.

FM-010076	MCS EASEL BACK MACHINE "SPM117EB " ...ATTACHES EASEL BACKS TO PICTURE FRAMES
$ 5,000	MCS MACHINE CORPORATION MOD SPM117EB EASEL BACK MACHINE ELECTRO NEUMATICALLY ATTACHES THE EASEL BACK TO THE PICTURE FRAME Click for more.
	Good condition	Year: 1994
Mexico	A Great Value for the money!	Photos / Lit.

FM-010086	MITRE-MITE "VN 2+1 " ...PNEUMATIV UNDER-PINNER/V-NAILER
$ 2,250	3 mm, 5, 7, 10, 12, 15 mm V-Nail sizes, moulding width from 3/8" min. - 5" max., 1/4" min. - 5-1/4" max. moulding height. ; A bench top frame assembl... Click for more.
	New, Never Used	Year: 2008
Midwest	Still in an original box.	Photos / Lit.

FM-010093	MITRE-MITE "VN 4 " ...V NAILER
$ 950	Pneumatic machine, machine press nail into backside of the moulding. Nail heads that are included in the purchase are 7mm, 10mm, 15mm. Click for more.
	Good condition	Year: n/a
Midwest	Going out of business!	Photos / Lit.

FM-010099	MITRE-MITE "VN 4 " ...V NAILER
$ 1,200	Pneumatic machine, machine press nail into backside of the moulding. Nail heads that are included in the purchase are 7mm, 10mm, 15mm. Click for more.
	Very good condition	Year: N/A
Southeast	Includes the stand.	Photos / Lit.

FM-010102	MITRE-MITE "VN 42 " ...PNEUMATIV UNDER-PINNER/V-NAILER
$ 1,900	3 mm, 5, 7, 10, 12, 15 mm V-Nail sizes, moulding width from 3/8" min. - 5-1/2" max., 1/4" min. - 4-1/2" max. moulding height, 4, 6 or 8 sided frames. ... Click for more.
	Very good condition	Year: 1998
South	1/2 The price and they don't come any "NEWER". - Except from the Factory!	Photos / Lit.

FM-010075	MITRE-MITE "VN 42 " ...PNEUMATIV UNDER-PINNER/V-NAILER
$ 1,900	3 mm, 5, 7, 10, 12, 15 mm V-Nail sizes, moulding width from 3/8" min. - 5-1/2" max., 1/4" min. - 4-1/2" max. moulding height, 4, 6 or 8 sided frames. ... Click for more.
	Good condition	Year: N/A
Mexico	A Great Value for the money!	Photos / Lit.

FM-010110	MITRE-MITE "VN 42 " ...PNEUMATIV UNDER-PINNER/V-NAILER
$ 1,900	3 mm, 5, 7, 10, 12, 15 mm V-Nail sizes, moulding width from 3/8" min. - 5-1/2" max., 1/4" min. - 4-1/2" max. moulding height, 4, 6 or 8 sided frames. ... Click for more.
	Good condition	Year: N/A
Mexico	A Great Value for the money!	Photos / Lit.

FM-010111	MITRE-MITE "VN 42 " ...PNEUMATIV UNDER-PINNER/V-NAILER
$ 1,900	3 mm, 5, 7, 10, 12, 15 mm V-Nail sizes, moulding width from 3/8" min. - 5-1/2" max., 1/4" min. - 4-1/2" max. moulding height, 4, 6 or 8 sided frames. ... Click for more.
	Good condition	Year: N/A
Mexico	A Great Value for the money!	Photos / Lit.

FM-010112	MITRE-MITE "VN 42 " ...PNEUMATIV UNDER-PINNER/V-NAILER
$ 1,900	3 mm, 5, 7, 10, 12, 15 mm V-Nail sizes, moulding width from 3/8" min. - 5-1/2" max., 1/4" min. - 4-1/2" max. moulding height, 4, 6 or 8 sided frames. ... Click for more.
	Good condition	Year: N/A
Mexico	A Great Value for the money!	Photos / Lit.

Page 1 Page 2 Page 3

Page 1 Of 3 Total Return To Top

Print this page

1805 Sardis Road North - Charlotte, North Carolina 28270 USA
Phone: +1 704-841-2001 Fax: +1 704-841-1200
Customer Service: Leilani Silo

Warehouse / CNC & Machine Reconditioning Center
8191 Logistic Drive - Zeeland, Michigan 49464 USA
Phone: + 1 616-772-1520 Fax: +1 616-772-1690
Customer Service: Amanda Solomon

Copyright © 2009 EX-FACTORY INC. All rights reserved.
----- Privacy Policy / Terms & Conditions of Sale -----