Used and New Equipment For Sale

All Equipment: CLAMPS - CASE & FEED THRU - 45 Listings

Refine search criteria by manufacturer, condition and region below.

Product Manager
Karl Balg
Ext. 355

F
E
A
T
U
R
E
D

2006 GANNOMAT CONCEPT 70 PRIMUS

RITTER R-525

(3) Clamps - Case & Feed Thru in Auction!

2010 RITTER R-525

Page 1 Of 2 Total

View All Listings Sort By Price

Page 1 Page 2

EX-FACTORY #

Brand / Model / Machine Type

Photos / Literature

CC-010673	COMIL "CF-2000 ELECTRONIC " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
$ 22,500	Automatically self-adjusting Feed Through Clamp with pneumatic clamping pressure & electronic self-setting of clamping units according to cabinet size... Click for more.
	Good condition	Year: 1989
Western Cdn	A lot of machine & equipment value for the money!	Photos / Lit.

CC-010756	COMIL "CF-2000 ELECTRONIC " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
€ 37,900	Automatically self-adjusting Feed Through Clamp with pneumatic clamping pressure & electronic self-setting of clamping units according to cabinet size... Click for more.
	Very good condition	Year: 2000
Europe	A specilized machine with upgraded width of 1000 mm.	Photos / Lit.

CC-010664	COMIL "CF-2000 JUNIOR " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
$ 18,900	Automatically self-adjusting Feed Through Clamp with pneumatic clamping pressure & electronic self-setting of clamping units according to cabinet size... Click for more.
	As-Is, good or bad	Year: 1994
Midwest	Hard to find on the pre-owned market!...this one is ready for production.	Photos / Lit.

CC-010676	COMIL "CF-2000 JUNIOR " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
€ 26,820	Automatically self-adjusting Feed Through Clamp with pneumatic clamping pressure & electronic self-setting of clamping units according to cabinet size... Click for more.
	Very good condition	Year: 1996
Italy	A COMPLETE LINE READY TO GO!... AND less than 1/2 PRICE of a NEW ONE!	Photos / Lit.

CC-010764	CUSTOM BUILT "CUSTOM " ...CASE CLAMP (SINGLE BAY)
$ 3,700	84" Wide x 65" high x 24" deep clamping cap., upright design, clamping operation by (4) air cylinders. ; Fully adjustable with vertical and horizonta... Click for more.
	Good condition	Year: 1994
Midwest	Custom built furniture press!	Photos / Lit.

CC-010593	ERREGI "TECHNOPRESS " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
€ 62,480	Feed through Case Clamp with high productivity and low operating costs; the vertical pressing system with motors, moves according to the size of the p... Click for more.
	Brand new with warranty	Year: 2010
Italy	Near perfection in a Feed Through Case Clamp with accuracy and strength to keep it all together!	Photos / Lit.

CC-280289	GANNOMAT "260 " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 3,500	100" x 50" x 26" Cap., (3) vertical combination air cylinders & shoes mounted on horizontal beam for top pressure, 0.33 HP motor for up/down travel. ;... Click for more.
	As-Is, good or bad	Year: 1987
Mid-atlantic	"TWO" FOR THE PRICE OF "ONE"	Photos / Lit.

CC-010779	GANNOMAT "CONCEPT 70 PRIMUS " ...CASE CLAMP (AUTOMATIC)
$ 22,000	Length - min. 6.0" and max. 100-1/2", Height - min. 6.0" and max. 55", Depth - 26". ; This multi-purpose case clamp with interlocking vertical and ho... Click for more.
	Very good condition	Year: 2006
Southwest	A "MUST HAVE" Machine if you use Dowel Construction!	Photos / Lit.

CC-010716	HANDY "408-A " ...CASE CLAMP (PNEUMATIC)
$ 1,350	Non-revolving type, (2) 28" x 48" cast iron clamp platens for horizontal pressure, 6' max opening, 10" dia. air cylinder for clamp pressure; (2) overh... Click for more.
	Good condition	Year:
Midwest	WOW - Look at that price; This will not be on the market for long.	Photos / Lit.

CC-010710	HESS "CASEY " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 3,780	98-1/2" x 53" x 23-1/2" Working size. Air cylinder powered height adjustment of top pressure beam w/automatic push button locking, beam travels on rac... Click for more.
	Fair Condition	Year: 1988
Pacific Northwest	Not in the BEST shape, but at a PRICE where you can AFFORD some repairs!	Photos / Lit.

CC-280235	HESS "L-2500 " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 18,900	Will clamp a max. of 2,500 mm (8') long by 1,250 mm (4') high by 600 mm (2') deep case goods. Horizontal motorized beam with (3) vertical top pressure... Click for more.
	Brand new with warranty	Year: 2010
Northeast	In stock and ready to ship - brand new w/warranty, a German made HESS Case Clamp!	Photos / Lit.

CC-280298	HESS "STANDARD " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 3,900	100" x 60" x 24" Cap., single bay clamp; equipped with (3) vertical and (2) horizontal double cylinder pneumatic clamps with pressure bars. Vertical b... Click for more.
	Good condition	Year: 1986
Southwest	German quality case clamp. A real work horse.	Photos / Lit.

CC-280296	HESS "STANDARD " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 4,450	100" x 60" x 24" Cap., single bay clamp; equipped with (3) vertical and (2) horizontal double cylinder pneumatic clamps with pressure bars. Vertical b... Click for more.
	Good condition	Year: 1989
Northeast	A lot of machine and equipment value for the money.	Photos / Lit.

CC-280304	HOLZ-HER "1516 " ...CASE CLAMP (SINGLE BAY)
$ 3,590	(1) Bay clamp, 103" x 55" x 24" clamping cap.; (1) moveable, vertically positioned clamping beam with (2) horizontal clamps, (3) adjustable vertical c... Click for more.
	Good condition	Year:
Pacific Northwest	Here's a Case Clamp for about 1/2 the price of other Pre-owned clamps!	Photos / Lit.

CC-010775	HOLZ-HER "1528 " ...CASE CLAMP (2 STATION)
$ 4,990	(2) Individual workstations and a total of (20) pneumatic clamp cylinders, each station with (2) vertical and (3) horizontal clamps with a 3-7/8" cyli... Click for more.
	Very good condition	Year: 1998
Southeast	A Condition like this AND less than 1/2 PRICE of a NEW ONE!	Photos / Lit.

CC-010783	HOLZ-HER "1528 " ...CASE CLAMP (2 STATION)
$ 5,000	(2) Individual workstations and a total of (8) pneumatic clamp cylinders, each station with (4) horizontal clamps with a 3-7/8" cylinder stroke. ; Sp... Click for more.
	Good condition	Year:
Eastern Cdn	under power & available for demo & inspection	Photos / Lit.

CC-010769	HOLZ-HER "1530 " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 5,490	86" X 47" X 24" Wide clamping capacity. - Motorized top pressure beam, vertical pressure beam & horizontal top beam equipped with (5) clamping bars, t... Click for more.
	Cleaned and checked	Year: 1988
Mid-atlantic	This one has been "CLEANED & CHECKED" & is ready for PRODUCTION. - Give us a call.	Photos / Lit.

CC-010534	ITALPRESSE "PRIMATIST/25 " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 35,900	98" x 25-1/2" Wide x 49" high clamping cap., and 9" x 9-1/2" x 6" minimum. Set-up free operation with motorized positioning and clamping of both inter... Click for more.
	Brand new with warranty	Year: 2010
Southeast	Motorized, no setup, no clamping shoes - put in the cabinet and push the button!	Photos / Lit.

CC-010770	ITALPRESSE "SP/1-A " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
$ 39,700	Case goods capacity: 99" Max. & 11.8" min. length, 51" max. height & 11.8" min. height, 26" max. width. ; Left-to-right feed, via infeed belt convey... Click for more.
	Very good condition	Year: 2006
South	Late "top-of-the-line" model and ready for immediate delivery!	Photos / Lit.

CC-010565	ITALPRESSE "SP/1-A " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
$ 79,200	Case goods capacity: 99" max. & 11.8" min. length, 51" max. height & 11.8" min. height, 26" max. width, left to right feed, via infeed belt conveyor,... Click for more.
	Brand new with warranty	Year: 2010
Southeast	Quality and price are only the begining with this clamp!	Photos / Lit.

CC-010772	LIGMATECH "MDE 10/08 " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
€ 65,900	LIGMATECH Self-adjusting Feed Through Case Clamp Line with: Electrically generated clamping pressure & electronic self-setting of clamping units accor... Click for more.
	Good condition	Year: 2000
Germany	A Condition like this AND less than 1/2 PRICE of a NEW ONE!	Photos / Lit.

CC-010762	LIGMATECH "MDE 10/08 " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
€ 88,500	LIGMATECH Self-adjusting Feed Through Case Clamp Line with: Electrically generated clamping pressure & electronic self-setting of clamping units accor... Click for more.
	Good condition	Year: 2002
Germany	A Machine like this doesn't come on the market often!	Photos / Lit.

CC-010776	LIGMATECH "MDE 100 / MPN 100 OPTIMAT " ...CASE CLAMP (AUTOMATIC FEED THROUGH)
€ 69,000	LIGMATECH Self-adjusting Feed Through Case Clamp Line with: Electrically generated clamping pressure & electronic self-setting of clamping units accor... Click for more.
	Good condition	Year: 2004
Europe	High producer at cost your can afford	Photos / Lit.

CC-010778	LIGMATECH "MPH 400 " ...CASE CLAMP (FEED THROUGH DESIGN)
$ 35,300	(1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads... Click for more.
	Excellent condition	Year: 2007
Northwest	Late "top-of-the-line" model and ready for immediate delivery!	Photos / Lit.

CC-010732	LIGMATECH "MPH 500 " ...CASE CLAMP (AUTOMATIC)
€ 30,000	(1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads... Click for more.
	Very good condition	Year: 2006
Germany	Late "top of the line" model and ready for immediate delivery.	Photos / Lit.

CC-280311	MANEA "NA " ...CASE CLAMP (2 STATION)
$ 8,750	Manual Dual Station Case Clamp: Capacity for each (individual) station, L-78", H-55", D-28". Vertical side pressure beams can be positioned toward eit... Click for more.
	Good condition	Year: 1988
Mid-atlantic	GREAT Clamp for producing Modular Casework	Photos / Lit.

CC-280290	MEGA-TECH "DIK AC-10 " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 4,950	100" x 50" x 26" Cap., (3) vertical combination air cylinders & shoes mounted on horizontal beam for top pressure, 0.33 HP motor for up/down travel. ;... Click for more.
	Good condition	Year: 1989
Mtn/central Cdn	Still in "pretty good" condition at a FRACTION of a new machine price!	Photos / Lit.

CC-280310	MEGA-TECH "DIK CC-14 " ...CASE CLAMP (SINGLE BAY)
$ 2,980	Basic "HEAVY DUTY" Manual Case Clamp: Capacity, 96" x 48" x 32". ; Top Pressure: (3) vertical dual air cylinders with pressure bars moveable form sid... Click for more.
	Good condition	Year: 1989
Midwest	Simple to use and maintain. Great Starter Clamp and really "Heavy Duty"!	Photos / Lit.

CC-010763	OTT "KPS 2513 " ...CASE CLAMP (SEMI-AUTOMATIC)
$ 10,900	Clamping Capacity: W-96", H-56", D-30" (W-12" x H-12" min. cap.). Motorized horizontal & vertical beams move simultaneously or individually at 13 FPM.... Click for more.
	Cleaned and checked	Year: 1989
West Coast	A machine in this condition and specification is hard to find!	Photos / Lit.

CC-010733	RAMARCH "PN-28 " ...CASE CLAMP (2 STATION)
$ 7,900	(2) Individual "side-by-side" workstations and a total of (32) pneumatic clamp cylinders, each bay with (4) vertical and (4) horizontal clamps with a ... Click for more.
	Very good condition	Year:
Northwest	This is a true workhorse with plenty of production to go!	Photos / Lit.

Page 1 Page 2

Page 1 Of 2 Total Return To Top

Print this page

1805 Sardis Road North - Charlotte, North Carolina 28270 USA
Phone: +1 704-841-2001 Fax: +1 704-841-1200
Customer Service: Christiane Hallak

Warehouse / CNC & Machine Reconditioning Center
8191 Logistic Drive - Zeeland, Michigan 49464 USA
Phone: + 1 616-772-1520 Fax: +1 616-772-1690
Customer Service: Amanda Palmer

Copyright © 2010 EX-FACTORY INC. All rights reserved.
----- Privacy Policy / Terms & Conditions of Sale -----