Used and New Equipment For Sale

All Equipment: BORING MISC. - VERTICAL - 42 Listings

Refine search criteria by manufacturer, condition and region below.

Product Manager
Louis Sicotte
Ext. 329

F
E
A
T
U
R
E
D

(3) Boring Misc. - Vertical in Auction!

PAUL & EUGEN MAYER DBSH

SHOP FOX W1680

2009 MAX MD-18

Page 1 Of 2 Total

View All Listings Sort By Price

Page 1 Page 2

EX-FACTORY #

Brand / Model / Machine Type

Photos / Literature

BV-280291	ARO "4 Spindle " ...BORING (VERTICAL)
$ 3,500	Equipped with: 4-Spindle boring aggregate for drilling from multiple directions. Click for more.
	Good condition	Year:
Midwest	A versatile borer.	Photos / Lit.

BV-280292	ARO "7 Spindle " ...BORING (VERTICAL/HORIZONTAL)
$ 5,500	Equipped with: 7 motor spindle boring aggregate for drilling workpieces from multiple directions. Click for more.
	Good condition	Year:
Midwest	Versatility and 7 spindles too!	Photos / Lit.

BV-280277	AYEN "ED 08/4 " ...BORING (BACK POST)
$ 810	12" Thickness cap., 6" stroke, 0.9 HP motor. - Equipped with: 4-Spindle boring aggregate for drilling knot holes or defects from workpieces. Click for more.
	Good condition	Year: 1985
Atlantic Cdn	Load the aggregate up with various size Forstner bits, then drill & plug problem boards!	Photos / Lit.

BV-010575	CANWOOD "CWD 11-200 " ...DRILL PRESS
$ 295	Approx. 13" Cap., approx. 6" stroke, 1/2 HP motor; approx. 12" dia. table w/rack & pinion raise-and-lower mechanism, approx. 21" table travel up-and-d... Click for more.
	As-Is, good or bad	Year:
Western Cdn		Photos / Lit.

BV-010315	CEMCO "MVB-54 " ...BORING (VERTICAL)
$ 12,110	54" x 15" Cast iron table with 54" x 23" wooden top (hardwood), (4) 1 HP - 1,725 RPM direct drive spindle motors to (4) universal spindle drives with... Click for more.
	Very good condition	Year: 1995
Northeast	Just look at the photos; what a beautiful machine - currently setup for Snowboard boring pattern!	Photos / Lit.

BV-010585	CEMCO "MVB-72 " ...BORING (VERTICAL)
$ 2,750	72" x 15" Cast iron table with 72" x 23" wooden top (hardwood), (8) 1 HP - 1,725 RPM direct drive spindle motors to (7) universal spindle drives with... Click for more.
	As-Is, good or bad	Year:
Northeast	It's not pretty but a little work to rewind some motors and ready to work for you.	Photos / Lit.

BV-010439	CLAUSING "227-6 " ...DRILL PRESS
$ 1,940	20" Cap., 5-1/2" manual stroke of spindle, 30" vertical travel (according to tooling); 1.5 HP - 1,750 RPM motor. ; Features: Quick-set spindle speeds... Click for more.
	Good condition	Year:
Great Plains	Machine gone over & bearings replaced & table mechanism/crank repaired.	Photos / Lit.

BV-280301	CUSTOM BUILT "32 mm " ...BORING (VERTICAL)
$ 995	Custom built 32 mm on center vertical boring unit to drill cabinet end panels. Equipped with: (1) fixed fence jaw (1) pneumatic opposing clamping j... Click for more.
	Good condition	Year:
Southwest	Awesome Cabinet End Panel Borer! 9 Spindles 3 Rows!	Photos / Lit.

BV-010583	CUSTOM BUILT "32 mm " ...BORING (VERTICAL)
$ 2,500	Custom built 32 mm on center vertical boring unit to drill rails for cabinet sides, works great! ; Comes with: On/Off start, heavy duty motor, guards... Click for more.
	Good condition	Year:
Eastern Cdn	Built to handle heavy production and easy to operate.	Photos / Lit.

BV-280297	DOUCET "AIRBOR 735-4 " ...BORING (HORIZONTAL)
$ 14,500	The sturdy and compact AIRBOR 735 is a budget-priced Vertical / Horizontal Boring Machine performing with high precision and accuracy. ; Operated by ... Click for more.
	Excellent condition	Year: 2002
Eastern Cdn	Only used for 1 job; outstanding condition and just about 1/2 of new!	Photos / Lit.

BV-010579	EKSTROM/CARLSON "448 " ...BORING (VERTICAL)
$ 1,350	(2) Spindles w/ the following motor arrangement: (2) 1 HP motors that would drive (2) single drilling spindles.; The drill heads are adjustable front... Click for more.
	Good condition	Year:
Pacific Northwest		Photos / Lit.

HW-010016	GRASS "ECOPRESS " ...BORING (HINGE)
$ 1,295	Hinge Boring & Inserting Machine with 1.5 HP motor for boring GRASS hinge pattern, baseplates and Zargen, manual feed. - Capable of line boring (not e... Click for more.
	Excellent condition	Year:
West Coast	A Condition like this AND less than 1/2 PRICE of a NEW ONE!	Photos / Lit.

HW-010017	HETTICH "BLUE MAX " ...HINGE INSERTION MACHINE
$ 1,150	Euro hinge drilling and insertion machine. boring pattern for euro-hinges. ; 3450 RPM, with pneumatic drill stroke and hinge insertion. ; (2) msprin... Click for more.
	Excellent condition	Year:
West Coast	A GREAT value for this machine!	Photos / Lit.

MM-280361	HETTICH "BLUE MAX MINI " ...Drill
$ 1,500	Suitable for installing: Hinges Connecting Fittings Knock in mounting plates Click for more.
	Good condition	Year: N/A
South	A Great Value for the money!	Photos / Lit.

BV-010373	KOCH "BL-G " ...BORING (VERTICAL/HORIZONTAL)
$ 33,620	98" Length cap., 1-1/4" - 12" material width and 1/2" - 4" max. thickness; horizontal & vertical boring heads are fully adjustable along the entire st... Click for more.
	Good condition	Year: 1998
Midwest	Great for rails and curved frame parts: Vertical, horizontal, end or edge boring!	Photos / Lit.

BV-010391	LOBO "BH-26 " ...BORING (VERTICAL/HORIZONTAL)
$ 4,940	(2) Identical stations for boring compound angle holes in short pieces such as chair or barstool legs. ; Each station: (2) Vertical boring heads & (2... Click for more.
	Good condition	Year:
Midwest	A lot of machine & equipment value for the money!	Photos / Lit.

BV-010588	LOBO "DP-222F " ...DRILL PRESS
$ 875	22" Cap., 4 3/4" manual stroke of spindle, table tilts 90 degrees each side, MT #4, 5/8" chuck. ; Features: Quick-set spindle speeds of 12 Speeds of ... Click for more.
	New, Never Used	Year: 1999
Southeast	This drill has been in a Showroom all of it's life!	Photos / Lit.

BV-010505	LOBO "DR-306 " ...BORING (VERTICAL)
$ 9,320	3' x 6' vertical multiple boring machine. ; Fully cast components. Convenient oil pump for hydraulic power. Each spindle can be adjusted forwards/ba... Click for more.
	Good condition	Year:
Mexico	A Great Value for the money! FOB MEXICO!	Photos / Lit.

BV-010573	MAX "MD-18 " ...DRILL PRESS
$ 2,345	Spindle-to-table 18", 1-1/4" drilling capacity; 5" spindle travel; (12) speeds & 150-3,000 RPM. ; 3" Face milling capacity and 3/4" end milling cap.;... Click for more.
	Brand new with warranty	Year: 2009
Midwest	Price has been reduced! - Take it before somebody else snatches it away!	Photos / Lit.

BV-010523	MCKNIGHT-MILLER " " ...BORING (VERTICAL)
$ 9,200	15" X 48" work table; (2) 2 HP spindle drive units, (2) pneumatic holddown clamps. Foot pedal operations. Click for more.
	Good condition	Year: NA
Midwest	American made equipment at an affordable price!	Photos / Lit.

BV-010590	MCKNIGHT-MILLER "240-72 " ...BORING (VERTICAL)
$ 8,500	4 Spindle drive motors each 2 HP, 28" X 76" table with 3HP hydraulic pumping unit, (5) spindles with jacob chucks and one each spring loaded hold dow... Click for more.
	Cleaned and checked	Year:
Midwest	American made equipment at an affordable price!	Photos / Lit.

BV-280268	MCKNIGHT-MILLER "240-96 " ...BORING (VERTICAL)
$ 11,340	(8) Drive motors (four at 5 HP & four with 2 HP motor), mounted on horizontal movable spindle supports; each with timing belt drive to FPREST CITY bor... Click for more.
	Good condition	Year: 1995
Midwest	A true workhorse!	Photos / Lit.

BV-010452	PAUL & EUGEN MAYER "DBSH " ...BORING (VERTICAL)
$ 2,930	Dual head with dual holddowns, 37" maximum distance between centers. Spindles tilt from vertical to horizontal. Click for more.
	Very good condition	Year:
Midwest	A TILTING vertical borer - how many of these have you seen?	Photos / Lit.

BV-010584	ROCKWELL "70-400 " ...DRILL PRESS
$ 265	Spindle-to-column 20", 1" Drilling capacity;#2 MT spindle with 6" spindle travel; (5) speeds & 500-2600 RPM; ajustable production table, 3-3/4" column... Click for more.
	Good condition	Year:
Midwest	Excellent compact production unit with stand.	Photos / Lit.

BV-010544	ROCKWELL "70-400 " ...DRILL PRESS
$ 1,230	Spindle-to-column 20", 1" Drilling capacity;#2 MT spindle with 6" spindle travel; (5) speeds & 500-2600 RPM ; 19"x22" adjustable production oil table... Click for more.
	Good condition	Year:
Mid-atlantic	A true workhorse!	Photos / Lit.

BV-010589	ROOT "CFH " ...BORING (VERTICAL)
$ 5,650	6) Spindles and drive unit 15 HP, (6)spring loaded hold downs, 96" X 14" cross line boring area, 28" X 103" table size, table stroke adjustable 1/2" t... Click for more.
	Good condition	Year:
Midwest	A true workhorse!	Photos / Lit.

BV-010591	ROOT "CFH " ...BORING (VERTICAL)
$ 5,750	(6) Spindles, 15 HP main motor, 103" x 28" table size, 14" cross line spindle adjustment, 1" to 12" adjustable spindle stroke, 2HP Hydraulic pumping u... Click for more.
	Cleaned and checked	Year:
Midwest	A true workhorse!	Photos / Lit.

BV-280294	ROOT "CXH " ...BORING (VERTICAL)
$ 4,500	72" x 18" max. boring, (5) spindles operate at 1800 RPM's and are driven off a main shaft by a 7.5 HP motor. I have 2 extra gear boxes. ; Features: A... Click for more.
	Fair Condition	Year:
Midwest	Works good but needs some wiring help.	Photos / Lit.

BV-280255	ROOT "CXH " ...BORING (VERTICAL)
$ 6,480	72" x 30" max. boring, (5) spindles operate at 1800 RPM's and are driven off a main shaft by a 7.5 HP motor. ; Features: Adjustable arms for easy pos... Click for more.
	Good condition	Year:
Southeast	American made equipment at an affordable price!	Photos / Lit.

BV-010557	ROOT "CXHS2 " ...BORING (VERTICAL)
$ 39,700	(24) Spindle S-37 type spindles and drive units, (12) on front and (12) on rear shaft, (2) hold downs, 20 HP main motor at 1,750 RPM belted to (2) hor... Click for more.
	Cleaned and checked	Year: 1976
South	Large capacity vertical boring machine, will drill for years to come!	Photos / Lit.

Page 1 Page 2

Page 1 Of 2 Total Return To Top

Print this page

1805 Sardis Road North - Charlotte, North Carolina 28270 USA
Phone: +1 704-841-2001 Fax: +1 704-841-1200
Customer Service: Christiane Hallak

Warehouse / CNC & Machine Reconditioning Center
8191 Logistic Drive - Zeeland, Michigan 49464 USA
Phone: + 1 616-772-1520 Fax: +1 616-772-1690
Customer Service: Amanda Palmer

Copyright © 2010 EX-FACTORY INC. All rights reserved.
----- Privacy Policy / Terms & Conditions of Sale -----