You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001
bob.bullin@exfactory.com





If not available, try his/her backup:
Louis Sicotte ext 329
louis.sicotte@exfactory.com


EXF #:   EO-012284  
Brand/Model:  

BRANDT AMBITION 1650 FC

Machine Type:  

EDGEBANDER (W/PRE-MILLING & CORNER ROUNDING)

Year of Mfg.:   2010
Condition:   Good Condition   
Elect./Voltage:   230/400 V, 50/60 Cy, 3 Ph.
Value New: $ 135,000    Act Now!
Price: $   37,000 USD     (Convert)
Financing:   $ 753 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)

Description:

BRANDT - AMBITION HIGH FLEX 1650 FC (aka KDF-650) EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): 

Specifications:

  •  Edge & Workpiece Capacity:
    0.4 - 12 mm (0.016 - 1/2") edge; 8 - 60 mm (5/16 - 2-3/8") panel thickness; 160 mm (6-3/8") min. panel length and 70 mm (2-3/4") min. panel width.

    Equipped with: 
  •  Pre-Milling Station, (2) motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges.
  • Infrared Radiant Quartz Heating Unit between glue roller and pressure section.
  • Automatic Edge Magazine, for strip & coil stock, strips 0.4 mm - 12 mm (0.016 - 1/2"), coils up to 3 mm PVC and "HD" guillotine.
  • "Quick Change" Glue Tank for maintenance & glue color change.
  • Pressure Section, 1st. roller driven plus (3) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover.
  • Feed Speed, variable 8 - 18 MPM. (26 - 59 FPM), 14 MPM (46 FPM) when using contour trimming. 
  • BRANDT "PC-20" Program Control (Industrial PC) 600 MHz, Memory: 256 MB Ram, 1 GB Flash Card Drive, Operator control panel w/12" color active TFT display screen, soft keypad & internal modem for remote diagnostic link.

    Workstations: 
  •  End Trimming: (2) Motor @ 0.35 kW (1/2 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°.
  •  Flush/Bevel-Fine/Radius Trimming Unit: Top/bottom (2) motors, 0.55 kW (3/4 HP) 12,000 RPM, auto tilt postioning 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors for positioning of work-unit & horizontal copy wheels for quick changeover.
  • Multi Functioning Trimming (Corner Rounding) Unit: (2) Motor 0.4 kW (1/2 HP) 12,000 RPM for top/bottom linear edges and leading & trailing edges of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. Pneumatic (2) positioning indexing, quick change motors for different radius profiles change-over. 
  • Radius Scraping (PVC): Top/bottom with pneumatic indexing control, PVC scrape collection box. 
  •  Glue Scraping Unit: Flush top/bottom on panel surface with floating insert knives. 
  • Buffing Unit: Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM.
  • Complete with:
    Motorized, programmable hold-down pressure beam; padded sound enclosure, used tooling.  

    Note: Glue-Tank & CPU has been replaced in 2019. Working Hours have been re-set due to CPU replacement, actual total working hours are ~ 5800 Hrs.

    Actual Model is: BRANDT AMBITION 1650 FC High Flex (KDF-650 FC).

     
Questions? For Instant Communication, Click Here
Special Note: Reduced
Comment: BRANDT AMBITION HIGH FLEX 1650 FC everything you need for today's edgebanding requirements!
*Dimensions: 227" L x 62" W x 90" H
*Weight: 5,720 Lbs
Written By: Karl Balg
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions