For Immediate Help Contact:
Joe Retzlaff
(800) 374-5009 ext. 348
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Ed Webb ext.377
EXF #:   SX-300036  


Model:   FLEXY 1350 3TRF
Machine Type:  


Year of Mfg.:   2021
Condition:   Brand New w/Warranty  
Elect./Voltage:   240/480 V, 60 Cy, 3 Ph
List Price:   $ 134,500  
Our Price:   $ 129,950 USD    
Financing: $ 2,597 National Capital Leasing
Description:    (view full)

EMC FLEXY 1350 3TRF Finishing Sander with (3) Sanding Heads, Cross Belt, Roller, Superfinishing

Useful working width 1,350 mm (53"). Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). 

Head configuration:

1st Head: CROSS PAD T 50 C Electronic Cross Belt Sanding Pad
Electronic PAD segmented in 50 sections.

  • Width of the single element (section): 27.0 mm (1.06")
  • Abrasive belt length: 4,550 mm (179") Chevron belt length: 4,100  mm (161-1/2")
  • Abrasive belt width: 140 mm (5-1/2") Chevron belt width:130  mm (5-1/8") 
  • Main motor power: 11 kW (15 HP) with Electronic Inverter for variable belts speed from 3 - 22 m/Sec (9.8 - 72 FPS). Abrasive belt blower cleaner, with automatic on-off control.

    2nd Head: Roller "R"  Belts dimensions: 2,620 x 1,370 mm (103" x 54").
  • Roller diameter: 250 mm (10").
  • Roller rubber, hardness 85 Shore, Constant control to any position with accuracy  0.02 mm.
  • Rotation: Against feed (clockwise).
  • Motor power: 11 kW (15 HP). Automatic star-delta starter Rotating cutting speed:18 m/Sec (59 FPS). Blower for the roller unit.

    3rd Head: SUPERFINISHING PAD "F" Electronic PAD segmented in 50 sections. Belts dimensions: 2.620 x 1.370 mm.
  • Width of the single element  (section): 27.0 mm (1.06").
  • Electronic motorized roller pressure adjustment "grit-set system".
  • Rotation: Against feed (clockwise).
  • TIMING oscillating cleaning abrasive belt blowers for superfinishing.
  • Motor power: 11 kW (15 HP) with electronic inverter variable abrasive belt speed 3 to 18 m/Sec (9.8 - 59 FPS).

    Feed system:

    Constant pass line, 900 mm (35.4") from floor.  (In line machine) Internal independent motors including for cross belt units
    ● Vacuum bed, 4 kw for hold down of smaller parts, mounted inside of the machine base
    ● Idle table rollers support in infeed and outfeed
    ● Rubber covered presser rollers, grooved
    ● Variable feed belt speed, adjustable from 3 to 18 m/Min (9.8 - 59 FPM) Inverter Controlled
    ● Large diameter screws on machined guides with columns and pistons
    ● Automatic feed belt centering device

    General Machine Features: 
  • Independent main motors.
  • Analog ammeters, for each motor, on main control cabinet.
  • Electronic motorized grit set system, control from touch screen for each working group.
  • Automatic synchronized PAD anti-dubbing control, synchronized to ANY feed belt speed.

    Electronic programmable color TOUCH SCREEN display, 10" wide
    PLC with micro-processor of latest generation, modular and expandable
    Connection USB, RS232, Ethernet 10/100/1000
    Memory capacity: 100 working programs or more
    Graphic synoptic to facilitate programming

    Software facilities:
  •  Automatic motor sequence starting.
  •  Command, programming and display for all electronic pad functions.
  •  Command, programming and display for thickness.
  •  Command, programming and display for feeding.
  •  Command, programming and display for all inverters.
  •  Command, programming and display for selected groups.
  •  Command, programming and display for blowers, including compressed air saving function. 
  •  Display report and reset of alarms (self diagnostic) with memory records.

    Options Included:

    Vacuum bed, 4 kW for holddown of smaller parts, mounted inside of the machine base

    Centralized Control Cabinet:   IP 54 protection. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors.
    Centralized independent pneumatic control cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI).
Special Note:
Written By: Joe Retzlaff  
*Dimensions:Available from product manager
*Weight:Please call
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.