|Year of Mfg.:||N/A|
|Elect./Voltage:||440 V, 60 Cy, 3 Ph.|
|Value New:||$ 40,000|
|Price:||$ 9,950 USD||(Convert)|
|Financing:||$ 202 National Capital Leasing|
|Region:||NORTHEAST (Click for Regional Map)|
LEBLOND 1610 Heavy Duty Engine Lathe
Swing over bed 16”
Swing over cross slide 10".
Max center distance 60"
Spindle nose D1-6
Spindle bore 1-3/4"
Spindle speeds 20 - 2660 RPM
Tailstock taper 4
Length of bed 10'
Width of bed 16-15/16"
Width of carriage 9"
Threads 60 changes from 2 to 120 tpi.
Feeds 60 changes from .0011" to .205" ipr.
Main motor 15 HP
Dimensions 109" x 52" x 34"
Weight 8,500 Lbs
5 position bed stop
4 way tool post
Cushman 3 jaw chuck 12"
|Written By:||Dale Granger|
|*Dimensions:||Available from product manager|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
A lathe is a machine tool that rotates its workpiece along a central spindle against a stationary cutting tool to both remove unwanted material and provide a better, smoother finish. The part is held between headstock and tailstock (the distance between centers) in a process called turning. They are used in the manufacture of cylindrically shaped products. In the case of larger pieces, steady rests may be used to support the workiece. Workpieces are set up most commonly with 3 or 4 jaw chucks or collet chucks. They can range from small, highly accurate tool room lathes to the large bore, large sized machinery common to the oil tool industry.