HOME > TURNING MACHINERY > TQ-010263 > RETURN

WARNER SWASEY M4500 CNC TURNING CENTER



For Immediate Help Contact:
Dale Granger
(800) 374-5009 ext. 331
Intl. +1 (704) 841-2001
Dale.Granger@exfactory.com
If not available, try his/her backup:
Marvin Spehar ext.452
Marvin.Spehar@exfactory.com
Brand:  

WARNER SWASEY

Model:   M4500
Machine Type:  

CNC TURNING CENTER

Year of Mfg.:   1993
Condition:   Very good condition   
Elect./Voltage:   220/440 V, 60 Cy, 3 Ph.
Value New:   $ 217,500
Price:   Please call     (Convert)
Region:   MIDWEST (Click for Regional Map)
EXF #:   TQ-010263  
Description:   (view full)

WARNER SWASEY M4500 4-AXIS CNC Turret Lathe 

Specifications:

  Swing over bed ways 28"

  Swing over carriage 25"

  Swing over cross slide 21"

  Spindle hole dia. 6.25",

  Spindle speed 19 - 838 RPM

  Spindle to turret face maximum 61.19"

  Side turret cross travel 13.75"

  Side turret longitudinal travel 47.07"

  End turret cross travel 15.25"

  End turret longitudinal travel 47.07"

  Floor space 20'-4" x 8'-6"

  Machine weight 27,000 Lbs

Equipped with:

  GE FANUC "16-TT" CNC control

  24" 3-jaw chuck with power chuck wrench (Internal/external chucking capabilities)

  (11) Turret positions including a 6-position side turret and a 5-position end turret

  Hardened ways

  Chip conveyor

  60 HP variable speed drive DC motor

Note:  Machine was completely rebuilt in 2001 and has only 1,000 Hrs on it since then.

    Special Note: Best Buy
    Comment: Machine was completely rebuilt in 2001 and has only 1,000 hours on it since then and is a steal at $46,000!
    Written By: Bill Merrigan  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    A turning center is a CNC controlled lathe.  Like most lathes, the workpiece is held by a chuck or collet, but the movement is computer controlled to ensure higher accuracy and efficiency.  The ability to program gives turning centers more versaility and efficiency than manual tool room and engine lathes can.  Some turning centers are further augmented with twin or sub spindles and and two turrets so that a workpiece can be machined on multiple faces, providing great savings in terms of setup time and efficiency.  The work that might require multiple machines and extra setups can be done with a single machine tool.