For Immediate Answers Contact:
(800) 374-5009 ext. 349
Intl. +1 (704) 841-2001
DIMTER OPTICUT 104
OPTIMIZING PUSH FEED CUTOFF SAW
|Year of Mfg.:||2001|
|Condition:||As Is Condition|
|Elect./Voltage:||480 V, 60 Cy, 3 Ph.|
|Value New:||$ 125,000|
|Region:||EASTERN CDN (Click for Regional Map)|
GRECON DIMTER OPTICUT 104 ...Defecting & Optimizing Crosscut System
Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left).
4" Thick x 13-1/2" wide max. incoming board cap., min. cap. is 1" x 1-1/2" wide.
16" Min. to 20' (6.1M) max. infeed board lengths, 3" min. to 16' max. outfeed lengths.
Specifications & Equipped with:
10 HP Arbor motor driving a 520 mm (19.7") dia. blade with 30 mm bore at 2,900 RPM; precision.
Servo Motor controlled Pusher Bar, 295 FPM max., travels full length of board, measuring length, (4) grades, and defect zones. Pusher arm automatically positions itself after measuring the board and precisely feeds the board into the saw with positioning accuracy of +/- 0.004" and cut accuracy of +/- 1/64".
Marking Sensor: Attached to the transport pusher arm and easily accepts incoming lengths up to 14'9".
Operation & Controls:
Saw uses (2) pneumatically operated side hold-over rolls before & after the saw blade; computer controlled holddown shoe ensures that stock is securely held in position during cut; holddown.
Hold-over devices, and precision Servo controlled pusher arm provide square, accurate, and high quality cuts - even on large cross sections
Programmable controls for cut lists, partial optimizing for yield and defecting capability.
Outfeed table; 10" wide x 12' long . (1)pneumatic ejectors ; software supports sorting.
Separate free-standing computer control cabinet, keyboard & mouse.
Machine runs perfectly but has been removed from service and cannot be seen in operation
Actual Model, Opticut 104 R.
|Comment:||Just came out of production|
|Written By:||Louis Sicotte|
|*Dimensions:||0" L x 0" W x 0" H|
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.