For Immediate Help Contact:
Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Louis Sicotte ext.329
EXF #:   EO-012309  


Model:   AMBITION 2262
Machine Type:  


Year of Mfg.:   2012
Condition:   Excellent condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New:   $ 225,000
Price:   $ 64,900 USD     (Convert)
Financing: $ 1,305 National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)
Description:   (view full)



  Working Capacity: 
Coiled stock min/max Edge thickness 0.4 - 3 mm (0.016. - 0.118"), Strip material min/max Edge Thickness 0.4 - 6 mm (0.16 - 0.234"),

Panel stock min/max thickness 12 - 40 mm (0.472" - 1.574"). Panel Over-Hang 30 mm (1.18").

  In-feed Fence:
Adjustable in-feed fence with manual digital indicator positioning. 

  Pre-Milling Station:
Two 3.0 kW (4.0 HP), 150 Hz, 9,000 RPM Motors; equipped with trimming column, (2) horizontal and cross slides with spindle adjustment, electro-pneumatic horizontal jump movement of the first motor; includes electronic frequency inverter for control of motor speed and braking, two (2) dust extraction hoods, air jet panel blow-off device & SIKO digital counters for adjustments.

  Panel Pre-Heater
Pre-heating the panel brings the panel to an appropriate temperature for better adhesion; this is especially beneficial in cooler temperatures.

Quartz lamp for heating substrate edge before glue application improved edge quality and optimum bonding.

  Multi-Purpose Magazine:

A multi-purpose 2-coil magazine expands capability by running coiled material, strips, and solid wood bands. 

Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table, allowing the operator to center the panel
on the edgeband.

  Gluing System: (EVA - Hot Melt)
QA 34 - Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.

34 mm Dia. Glue Roller allow for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gates

Lower melting unit equipped with automatic glue level control. Melting capacity: 12 KG/h (26 LBS/h)

  Pressure Section:
Manual Adjustment with digital counter, (1) large 160 mm dia. driven & (6) 70 mm dia idle rollers, pneumatic pressure control depending on edgbanding material used.


  End Trimming Unit HL 81:
0.8 kW (1.0 HP) x 2 - 200 Hz, 12,000 RPM Motors. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer 30 deg. to straight cut.

  Rough/Pre-Trimming Unit:
Top & bottom, 0.55 kW (0.74 HP) x 2 - 12,000 RPM Motors; Height adjustment with the top pressure-beam and tilting range +/- 1°.

Manually adjusted with digital counters.

  Profile/Bevel/Corner Rounding Unit FK 11:
Multi function 0.4 kW (0.54 HP) x 2)- 12,000 RPM Motor to fine trim the edge overhangs at the work-piece upper & lower edge, as well as trimming around the front & rear vertical edge; Servo controlled, Max. feed speed 20 MPM (65.6 FPM).

  Profile/Bevel Scraping Unit:
Top & bottom for thick PVC/ABS, pneumatically activated.

  Flat Glue Scraper Unit:
Top & bottom, pneumatically activated to remove potential glue squeeze-out.

  Buffing Unit:
Top & bottom edge buffing/polishing.

  Spraying Units:
Top/Bottom spraying device is designed for applying a separating agent, for easier cleaning of any residual glue on the panel. Separating agent is applied by spray nozzles, which are located in front of the panel sizing with manual adjustment in case of modifications of panel overhang.

Operator & Machine Control

  HOMATIC PC 22 Power Control:
Controller functions in Windows environment and features: Keypad w/LCD flat "Touch Screen" display, fault diagnostic, OS9 real-time operating system. Hand-held remote control pendant reaching to the out-feed end of the machine, very useful for set-up and testing new programs. includes (1) 2 liter (0.53 gallons) capacity holding tank


  Variable Feed-speed from 18 - 25 MPM (59 - 82 FPM); 80 mm feed track pads; Motorized top pressure beam V belt;  

  Electronic raising & lowering of top pressure beam. ● Manual adjustment of the infeed fence via digital counter for use with the pre-milling station. 

  Extendable Panel Support to max 800 mm (31.5"). 

  SIKO Digital adjustments. 

  Electronic DC brakes on all trim motors. 

  Sound cabins for all trim workstations. 

  Standard adjustable outboard panel support with additional floor supports for heavy panels. 

Actual Model is HOMAG OPTIMAT AMBITION 2262 (aka KAL 210)


    Special Note: Best Buy
    Comment: GREAT machine in EXCELLENT condition...under power & available for Inspection...TESTED AND INSPECTED BY A HOMAG TRAINED TECHNICIAN!
    Written By: Bob Bullin  
    *Dimensions:310" L x 52" W x 72" H
    *Weight:8,000 Lbs
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.