For Immediate Help Contact:
Bob Bullin
(800) 374-5009 ext. 346
Intl. +1 (704) 841-2001
If not available, try his/her backup:
Norm Schust ext.445
EXF #:   BP-280589  


Model:   JET 6000 XL
Machine Type:  


Year of Mfg.:   2001
Condition:   Very good condition   
Elect./Voltage:   208-230/460 V, 60 Cy, 3 Ph
Value New:   $ 185,000
Price:   $ 23,500 USD    
Financing: $ 478 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)
Description:   (view full)


Working Cap. "X" Axis 181.1"(4,600 mm), "Y" axis 61.2"(1,550 mm), "Z" axis stroke is 7.8" (200 mm).

  Positioning Speed: "X" axis is 262 FPM (80 MPM), "Y" axis 230 FPM (70 MPM), "Z" axis 49 FPM (15 MPM).

  Worktable: (8) Pneumatically locking panel supports, (4) lifter rails for heavy panels, (4) "MATRIX" vacuum pods per support; (8) Pneumatic backstops, (8) Pneumatic central stops, (4) pneumatic side stops & (4) pneumatic central stops; (4) independent work areas.

  Boring unit: 3 HP (2.2 kW) - 4,000 RPM motor; "TF 20+8" boring head with (20) independent vertical spindles (10) spindles in "X" axis & (10) spindles in "Y" axis..

 (4) Horizontal boring units with (1+1) in "X" axis & (1+1) in "Y" axis.

  Machining Units: (1) 14 HP (10.4 kW) Electro spindle router with HSK Chuck, (1,000 - 18,000 RPM); (1) 10-Position rotary tool changer mounted to the head for "on the fly" ATC.

  (1) Additional 9.5 HP (7 kW) router with RH rotation & ER32 adaptor.

  Operator & Machine Control: PC front end with "Genesis" + Windows 7 operating system (This was upgraded); 15" Color monitor, 1.44MB floppy & 8.4 GB hard disk system, 32X CD ROM, 64 MB RAM, (2) I/F serial ports, integrated modem, Ethernet card.

  "GENESIS" Software provides real-time information on tool position & error messages, visualization of RPM, current load meter, and more; positioning of panel supports and vacuum cups.

  "GENESIS" Software features automatic generation of G & M code, stop & restart, machine diagnostics, automatic optimization, and full graphic display with the possibility to associate up to (11) parameters and programming of up to (2,000) work lines per single-program; all built into a protective cabinet enclosure. (Office Key Not Included).

  Complete with 250 m³/Hr Vacuum Pump; safety mats, auto lubrication system, air conditioned control cabinet.

  Options Include:480 Volt, 3-phase transformer to run on 208V, 240V, 400V, or 480V.

NOTE: In very good condition used everyday for a particular job until we stopped doing the work. Fully Upgraded TPA Computer Windows 7 Professional (done in 2017) - Full Documentation - Fully operational Safety Mats, Rear Gate, Fencing- Becker Oil-less Vacuum Pump - Liquid-Cooled HD OMLAT main head - Every valve has been rebuilt (65 of them).

    Special Note:
    Comment: In very good condition used everyday for a particular job!
    Written By: Original Seller  
    *Dimensions:Available from product manager
    *Weight:Please call
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.