|
|
|
|
|
|
For Immediate Help Contact: |
|
|
|
| EXF #: | BP-012618 | |||
| Brand: |
RITTER |
|||
| Model: | R-18043X | |||
| Machine Type: |
CNC BORING MACHINE (P TO P) |
|||
| Year of Mfg.: | 2003 | |||
| Condition: |
Good Condition 
|
|||
| Elect./Voltage: | 230 V, 60 Cy, 3 Ph. | |||
| Value New: | $ 60,000 | |||
| Price: | $ 8,600 USD | |||
| Financing: | $ 175 National Capital Leasing | ||
| Region: | SOUTHEAST (Click for Regional Map) | ||
|
Description:
(view full)
RITTER R-18043X CNC BORING MACHINE (P TO P):
 Specifications:0-130" "X" Axis working field, Servo motor driven on "THK" Rail system; 0-3" Y-Axis travel, Servo motor driven on 1-1/2 diameter linear rail system; 0-3" Z-Axis travel, Pneumatic driven stroke. (2) independent 5 HP spindle motors with 7/16"-14 threaded female spindle nose; Adjustable spindle speed with 0-3" stroke. 2-1/4" fixed spindle centers with maxium 3/4" diameter drill bit. Variable spindle speeds by CNC or manual control, 1,000-3,000 RPM. Equipped with:(6) adjustable workpice holddown cyclinders; (6) material alignment fences; (4) material back-up dogs and drill guide bushing holder. Operator & Machine Control:FAGOR 8025MA CNC controller, with handwheel set-up assist and RS-232 port. (2) 4" dust hood outlets, 1800 CFM required, 90 PSI compressed air requirement. X&Y Axis are managed by controller, Z-Axis is managed manually Actual model is RITTER R-18043X |
| Special Note: | |
| Comment: | Under power & available for inspection |
| Written By: |
|
| *Dimensions: | Available from product manager |
| *Weight: | Please call |
|
*Dimensions & Weight data are based on 3rd party information and could be incorrect;
please verify & confirm if accurate dimensions & weight are required.
|
|
|
|
|
|
|
|
RITTER R-18043X CNC BORING MACHINE (P TO P):
Specifications:
0-130" "X" Axis working field, Servo motor driven on "THK" Rail system; 0-3" Y-Axis travel, Servo motor driven on 1-1/2 diameter linear rail system; 0-3" Z-Axis travel, Pneumatic driven stroke.
(2) independent 5 HP spindle motors with 7/16"-14 threaded female spindle nose; Adjustable spindle speed with 0-3" stroke. 2-1/4" fixed spindle centers with maxium 3/4" diameter drill bit. Variable spindle speeds by CNC or manual control, 1,000-3,000 RPM.
Equipped with:
(6) adjustable workpice holddown cyclinders; (6) material alignment fences; (4) material back-up dogs and drill guide bushing holder.
Operator & Machine Control:
FAGOR 8025MA CNC controller, with handwheel set-up assist and RS-232 port. (2) 4" dust hood outlets, 1800 CFM required, 90 PSI compressed air requirement. X&Y Axis are managed by controller, Z-Axis is managed manually
Actual model is RITTER R-18043X
Specifications:0-130" "X" Axis working field, Servo motor driven on "THK" Rail system; 0-3" Y-Axis travel, Servo motor driven on 1-1/2 diameter linear rail system; 0-3" Z-Axis travel, Pneumatic driven stroke.
(2) independent 5 HP spindle motors with 7/16"-14 threaded female spindle nose; Adjustable spindle speed with 0-3" stroke. 2-1/4" fixed spindle centers with maxium 3/4" diameter drill bit. Variable spindle speeds by CNC or manual control, 1,000-3,000 RPM. Equipped with:(6) adjustable workpice holddown cyclinders; (6) material alignment fences; (4) material back-up dogs and drill guide bushing holder.
Operator & Machine Control:FAGOR 8025MA CNC controller, with handwheel set-up assist and RS-232 port. (2) 4" dust hood outlets, 1800 CFM required, 90 PSI compressed air requirement. X&Y Axis are managed by controller, Z-Axis is managed manually
Actual model is RITTER R-18043X
Home Office
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
1805 Sardis Rd. North, Suite 107
Charlotte, NC 28270 USA
Ph: 800.374.5009 | Fax: +1 704.644.8068
International: +1 704.841.2001
Customer Service: nikki@exfactory.com
