You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext.  349
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Jim Reedy ext 455

EXF #:   SO-010439  


Machine Type:  


Year of Mfg.:   2002
Condition:   Good Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 125,000    Act Now!
Price: Please Call     (Convert)
Financing:   National Capital Leasing
Region:   SOUTHWEST (Click for Regional Map)


GRECON DIMTER OPTICUT 104 ...Defecting & Optimizing Crosscut System

Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left).

Working Capacity:

  • 4" Thick x 13-1/2" wide max. incoming board cap., min. cap. is 1" x 1-1/2" wide.
  •  16" Min. to 14.9" (4.5M) max. infeed board lengths, 3" min. to 16' max. outfeed lengths.

    Specifications & Equipped with:
  • 10 HP Arbor motor driving a 520 mm (19.7") dia. blade with 30 mm bore at 2,900 RPM; precision.
  • Servo Motor controlled Pusher Bar, 295 FPM max., travels full length of board, measuring length, (4) grades, and defect zones. Pusher arm automatically positions itself after measuring the board and precisely feeds the board into the saw with positioning accuracy of +/- 0.004" and cut accuracy of +/- 1/64".
  • Marking Sensor: Attached to the transport pusher arm and easily accepts incoming lengths up to 14'9".

    Operation & Controls:
  • Saw uses (2) pneumatically operated side hold-over rolls before & after the saw blade; computer controlled holddown shoe ensures that stock is securely held in position during cut; holddown.
  • Hold-over devices, and precision Servo controlled pusher arm provide square, accurate, and high quality cuts - even on large cross sections
  • Programmable controls for cut lists, partial optimizing for yield and defecting capability.

  • Outfeed belt driven by 2 HP motor; 10" wide x 23' long transport belt.  Pneumatic ejectors can be added; software supports sorting.  
  • Complete with: Separate free-standing computer control cabinet, keyboard & mouse.

  • Machine runs perfectly but has been removed from  service and cannot be seen in operation
  • Includes width scanning
  • Includes Video Jet Model 43S Ink Jet Marking System
  • Upgraded to Mill Vision in 2017
  • Motor rebuilt, including bearings, in 2017
  • Included is a reconditioned servo motor and controller
  • Controller touch screen is not functional but is not needed to operate the saw properly as the Windows computer manages all operations including cutlists

    Actual Model, Opticut 104 R.
Special Note:
Comment: Get a real deal Optimizer because the un-needed controller screen is "on the fritz"!
*Dimensions: 0" L x 0" W x 0" H
*Weight: 5,500 Lbs
Written By: Jeff Terrill
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions