You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Jeff Terrill
(800) 374-5009 ext.  349
Intl. +1 (704) 841-2001
jeff.terrill@exfactory.com





If not available, try his/her backup:
Jim Reedy ext 455
jim.reedy@exfactory.com


EXF #:   SO-010433  
Brand/Model:  

DIMTER OPTICUT 104

Machine Type:  

OPTIMIZING PUSH FEED CUTOFF SAW

Year of Mfg.:   2001
Condition:   Reconditioned   
Elect./Voltage:   575 V, 60 Cy, 3 Ph.
Value New: $ 135,000  
Price: $   49,800    Act Now!
Financing:   $ 1,013 National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)

Description:

DIMTER 104-R OPTIMIZING CUT-OFF SAW - RIGHT HAND MODEL (Feeds Right-To-Left)

Marking Station:

The marking section, which is attached to the transport section, can handle boards up to 20 feet long.

Infeed System:
The infeed system consists of a precision, servo-controlled pusher arm that travels along the full length of the board, measuring length, grade zones and defects.  The pusher arm automatically positions it's self after measuring the board and then precisely feeds the board into the saw.

Machine Infeed Parameters:
Board Length: 15-3/4" minimum to 20' maximum
Board Thickness: 3/4" minimum to 4" maximum
Board Width: 1" minimum to 13-1/2" maximum
Board outfeed length: up to 20' maximum
Board cross section: 3/4" x 15" minimum to 4" x 12" maximum

Machine Specifications:
Working height: 35"
Wood species: Soft/Hard Wood
Machine accuracy: +/- .008 inch (New)
Dust extraction: 100 Ft./Sec
Compressed air connection: 1" NPT with 1/2" connection
Compressed air pressure: 100 PSI
Operating temperature range: 40° to 104° Fahrenheit
Operating humidity range: 10 to 80%

The Saw:
The heavy (3,500 Lbs) GreCon Dimter "OptiCut 104" saw unit uses (2) pneumatically operated side hold-over rollers before and after the saw blade.  A computer-controlled hold down pressure shoe assembly is also used to ensure that boards are secured in position during the cut cycle.  These hold down and hold over devices and the precision servo-controlled push arm provide a square, accurate, high quality saw cut. Saw arbor drive is with a 10 HP motor.    

Saw blade specifications: 520 mm (20.5") diameter with a 30 mm bore
Saw blade speed: 2,900 RPM

Safety Devices:
On the infeed, if activated will stop the machine from operating to prevent operators from harm from moving parts or boards.  Electrically inter-locked covers and doors protect operating personnel generally.  Access can be gained to the electrical and mechanical sections of the saw unit via electrically interlocked doors and covers.

Outfeed Table
Non-driven metal outfeed supporting slide table, 8 Recft long, for manually sorting cutstock.

NOTES:
 
●  With 30-day warrranty
 ●  Operating voltage can be transformed to your voltage for $1,000.
 ●  Specifications are based on the saw unit when sold new   
 ●  Machine reconditioning will be completed by June 22, 2018
 

    Questions? For Instant Communication, Click Here
    Special Note:
    Comment: Reconditioned by a DIMTER experienced Technician!
    *Dimensions: 0" L x 0" W x 0" H
    *Weight: 5,500 Lbs
    Written By: Jeff Terrill
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

    Terms & Conditions