You are not logged in.    Login  |  Register  |  Help

Additional Photos (Click to view Larger)
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Tony Cornacchione
(800) 374-5009 ext.  432
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Dan Wolters ext 376

EXF #:   PM-010468  

FRIZ MFP-14/27

Machine Type:  


Year of Mfg.:   1998
Condition:   Very good condition   
Elect./Voltage:   600 V, 60 Cy, 3 Ph.
Value New: $ 325,000    Act Now!
Price: Please Call     (Convert)
Financing:   National Capital Leasing
Region:   NORTHWEST (Click for Regional Map)


FRIZ "MFP" Membrane Press with Double shuttle with loading from both ends:

  • Platen dimensions of 1,400 mm (55.1") x 2,700 mm (106.2") with a useful pressing cap. 1,100 mm (43.3") x 2,400 mm (94.4"); 19-1/2" (500 mm) opening, chamber height for a max. material thickness of 3-1/8" (80 mm), max. specific chamber pressure of 5 bar or 80 PSI on ea. platen.

  • Actual size of heating platens 106" x 55" (2,700 x 1,400 mm), upper platen unit with electric resistance heating of 24 kW, lower platen with electric resistance heating, heating range up to 240° C; lower vacuum table with large cap. vacuum pump allows processing of concave surfaces.
  • (6) Large dia. down stroke hydraulic cylinders with 500 mm (19-1/2") stroke.

    Equipped & Complete with:
  • (2) Double-roll manual material holders (for each table/tray - (1) is new -never used), for non-stop operation load (1) side while other side is in press; manual loading-and-unloading shuttle trays on each side of Press allow for continuous operation. When one table/tray is pushed in the other table is pushed out with the same operation.
  • Complete with: Hot air recycler for the compressed air used in pressure chamber and 15 HP hydraulic pump unit.

    Operation & Operator Interface:
  • Use of a user-friendly PLC "HOMATIC NC 16" control ensures the possibility to set & memorize variable operation parameters like time, pressure, vacuum & temperature.
  • The PLC control also provides for a MODE-2 cycle that allows the press to work without a membrane. This will allow working with veneers, no female moulds, evened out dimensinal tolerances, shorter pressing time, lower energy requirement & a higer degree of effiency.
  • This Press has a special execution for the table height that is at 33", which made it easier for loading and unloading.
Special Note:
Comment: Less than $100,000 and this Press will be sitting on your floor!
*Dimensions: Available From Product Manager
*Weight: 30,000 Lbs
Written By: Tony Cornacchione
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions