You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bernie Straple
(800) 374-5009 ext.  339
Intl. +1 (704) 841-2001
Bernie.Straple@exfactory.com





If not available, try his/her backup:
Amanda Solomon ext 374
amanda.solomon@exfactory.com


EXF #:   MC-011313  
Brand/Model:  

HYTROL 25-LRA

Machine Type:  

POWERED ROLLER CONVEYOR

Year of Mfg.:  
Condition:   Very good condition   
Elect./Voltage:   208/230/460/600 V, 60 Cy, 3 Ph
Value New: $ 20,000    Act Now!
Price: $   8,600 USD     (Convert)
Financing:   $ 175 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)

Description:

HYTROL 25-LRA POWERED ROLLER CONVEYOR:
Can be sold as one complete lot or individual sections.

NOTE: Published Asking Price is per each complete individual section of approx 22' total length. Additional discounts apply if purchased as (1) complete 396' lot.

SPECIFICATIONS: 

  •  The 25-LRA is a Heavy Duty accumulating belt driven live roller conveyor designed for use where zero pressure accumulation, low elevation(12") & close roller centers are required.
  • CONVEYOR SECTIONS:
    18 TOTAL individual powered sections. Each section consist of (1) approx 13' long x 48' wide (rail to rail) Idle rollers + (1) approx 9' long x 48" wide (rail to rail) POWERED section,

    Approx 22' total combined length of each complete individual POWERED + IDLER section;

    Approx total over-all length of the entire LOT OF 18 SECTIONS = approx 396 TOTAL LINEAR FEET over-all

    TECHNICAL DETAILS:
  • DRIVE BELT:
    14 in. black Ultimate 140 SD. BED–Roller bed with 2 1/2 in. dia. x 11 ga. un plated tread rollers spaced every 3 in. and 1.9 in. dia. x 16 ga. un plated pressure rollers spaced every 6 in. Mounted in 7 1/2 in. x 10 ga. powder painted formed steel channel frame. Bolted together with butt coupling.
  • END DRIVE:
    Located on infeed end of each powered conveyor section.
  •  DRIVE PULLEY:
    8 in. dia. with 1 7/16 in. dia. shaft at bearings, machine crowned and fully lagged.
  • TAIL PULLEY:
    4 in. dia. with 1 in. dia. shaft, machine crowned.
  • SUNB IDLER:
    Adjustable 2 5/8 in. dia. at drive pulley, 2 1/8 in. dia. at tail pulley. Pre-lubricated ball bearings.
  • RETURN IDLER:
    2 1/8 in. dia. at drive end, all others 1.9 dia. un plated. Pre-lubricated ball bearings.
  • TAKE UP:
    Take-up at tail pulley.
  • BEARINGS:
    Sealed, pre-lubricated, self-aligning ball bearings on drive and tail pulley. Sealed, pre-lubricated ball bearings in tread and pressure rollers.
  • ACCUMULATION ZONES:
    3 in. roller centers, 30 in. to 72 in. on 3 in. increments. Minimum length of infeed zone (drive) is 60 in. Frame length changes with zone length.
  • TREAD ROLLER BRAKE:
    Friction type brake stops tread rollers to prevent coasting of product in accumulation zone. 
  • ZONE CONTROLLER:
    Located in each zone (Retro-reflective). NEMA 1, 2, IP 62. UL Approved. IOP—Provides 27VDC, 100 watt power for accumulation system - contains slots for 4 input/output boards. Requires 120VAC or 230VAC single phase input.
  • AIR REQUIREMENTS:
    Recommended working pressure 40 P.S.I. Free air consumption at 40 P.S.I.– .028 cu. ft. per sensor actuation.
  • FILTER, REGULATOR:
    Supplied for main air supply line. (3/8 in. NPT port).
  • SPEED REDUCTION:
    Sealed Helical–Bevel C-Face gear reducer. No.60 roller chain to drive pulley.
  • MOTOR:
    1 HP–208/230/460/575V–3 PH. 60 Hz. Totally Enclosed C-Face.
  • CONVEYING SPEED:
    Constant 30 FPM.
  • CAPACITY:
    Maximum load per linear foot of conveyor 1000 lbs. Total load NOT TO EXCEED capacity in charts.  
  • LOAD CAPACITY CHART: 
    OVERALL FRAME WIDTH 42" TO 48" TOTAL LOAD (LBS.) UP TO 25' length = 16,500,
  • NOTE:
    The rollers are mounted above the support rails to accommodate materials wider than 48". 
  •  NOTE:The non powered idle rollers were removed from the conveyor and put in stack racks for ease of shipping. 

     
Special Note:
Comment:
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions