You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Ed Webb
(800) 374-5009 ext.  377
Intl. +1 (704) 841-2001
Ed.Webb@exfactory.com





If not available, try his/her backup:
Louis Sicotte ext 329
louis.sicotte@exfactory.com


EXF #:   EU-281161  
Brand/Model:  

BRANDT KD 79/2 CF

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2001
Condition:   As Is Condition   
Elect./Voltage:   460 V, 60 Cy, 3 Ph.
Value New: $ 70,000  
Price: $   8,950    Act Now!
Financing:   $ 182 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)

Description:

BRANDT KD-79 2CF EDGEBANDER WITH CORNER ROUNDING 

0.4 - 13 mm (0.016" - 1/2") Edge thickness cap., automatic coil & strip feed magazine, heavy duty guillotine for cutting 3 mm PVC coils, 12 mm - 50 mm (1/2" - 2") panel thickness.

Equipped with: 

  • Fast start-up granulate glue system (approx. 12 Min heatup time); Quick-change glue tank for easy maintenance and glue color change. Reversible rotation and rectractable glue roller.
  • Infrared Radiant Quartz heating unit between glue applicator roller and pressure zone.
  • 4-Roller pressure zone with powered large dia. first roller.

    Workstations:
  • Double motor end trimming unit (0.33 HP - 12,000 RPM), pneumatic indexing via program control, straight or chamfer up to 15° mounted on precision THK ways.
  • 1st Top & bottom fine trimming unit (0.5 HP - 12,000 RPM) 0° to 25° tiltable.
  • 2nd Top & bottom fine trimming unit (0.5 HP - 12,000 RPM) 0° to 25° tiltable.
  • 2-Motor Top & bottom contour trimming corner rounding unit (0.5 HP - 12,000 RPM motor ea.).
  • Top & bottom scraping unit for radius finishing of thick PVC top & bottom edges.
  • Top & bottom buffing unit at 2,800 RPM.
  • Electronic frequency inverter for all trimming motors; also incorporates electronic motor brakes.

    Operator & Machine Controls:
  • PC-16 program control system for & increased reliability and diagnostic with passive matrix 7.4" Color LCD screen. 8 mb IDE Flash Disc 100 mhz 486 DX4 Hard Drive, 8 mb RAM.
  • Internal Modem for remote diagnostic link.

    Features:
  • Powered height adjustment of the top pressure beam; panel spacing "signal light" at infeed, extended infeed fence and a 36 FPM feed speed; includes set of used tooling.

    NOTE: This machine requires a new PCM which went down in April. We decided to buy a new machine due to workload and time being down to fix this.
Questions? For Instant Communication, Click Here
Special Note: Bargain
Comment: Very low price! Requires new control panel - Still Make offer!.
*Dimensions: 270" L x 52" W x 72" H
*Weight: 5,955 Lbs
Written By: Original Seller
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions