You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Karl Balg
(800) 374-5009 ext.  355
Intl. +1 (704) 841-2001
Karl.balg@exfactory.com





If not available, try his/her backup:
Bob Bullin ext 346
bob.bullin@exfactory.com


EXF #:   EO-012309  
Brand/Model:  

HOMAG AMBITION 2262

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2012
Condition:   Excellent condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 210,000  
Price: Please Call    Act Now!
Financing:   National Capital Leasing
Region:   EASTERN CDN (Click for Regional Map)

Description:

HOMAG AMBITION 2262 (aka KAL 210) ... Production Edgebander with Pre-Milling & Corner Rounding:

WORKING CAPACITY

  •  Coiled stock min/max Edge thickness 0.4 - 3 mm (0.016. - 0.118"), Strip material min/max Edge Thickness 0.4 - 6 mm (0.16 - 0.234"),

    Panel stock min/max thickness 12 - 40 mm (0.472" - 1.574"). Panel Over-Hang 30 mm (1.18")
  • In-feed Fence:
    Adjustable in-feed fence with manual digital indicator positioning. 
  • Pre-Milling Station:
    Two 3.0 kW (4.0 HP), 150 Hz, 9,000 RPM Motors; equipped with trimming column, (2) horizontal and cross slides with spindle adjustment, electro-pneumatic horizontal jump movement of the first motor; includes electronic frequency inverter for control of motor speed and braking, two (2) dust extraction hoods, air jet panel blow-off device & SIKO digital counters for adjustments.
  • Panel Pre-Heater
    Pre-heating the panel brings the panel to an appropriate temperature for better adhesion; this is especially beneficial in cooler temperatures.

    Quartz lamp for heating substrate edge before glue application improved edge quality and optimum bonding
  • Multi-Purpose Magazine:

    A multi-purpose 2-coil magazine expands capability by running coiled material, strips, and solid wood bands. 

    Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table, allowing the operator to center the panel
    on the edgeband
  • Gluing System: (EVA - Hot Melt)
    QA 34 - Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.

    34 mm Dia. Glue Roller allow for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gates

    Lower melting unit equipped with automatic glue level control. Melting capacity: 12 KG/h (26 LBS/h)
  • Pressure Section:
    Manual Adjustment with digital counter, (1) large 160 mm dia. driven & (6) 70 mm dia idle rollers, pneumatic pressure control depending on edgbanding material used.

    WORKSTATIONS
  • End Trimming Unit HL 81:
    0.8 kW (1.0 HP) x 2 - 200 Hz, 12,000 RPM Motors. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer 30 deg. to straight cut.
  • Rough/Pre-Trimming Unit:
    Top & bottom, 0.55 kW (0.74 HP) x 2 - 12,000 RPM Motors; Height adjustment with the top pressure-beam and tilting range +/- 1°.

    Manually adjusted with digital counters.
  • Profile/Bevel/Corner Rounding Unit FK 11:
    Multi function 0.4 kW (0.54 HP) x 2)- 12,000 RPM Motor to fine trim the edge overhangs at the work-piece upper & lower edge, as well as trimming around the front & rear vertical edge. Max. feed speed 20 MPM (65.6 FPM)
  • Profile/Bevel Scraping Unit:
    Top & bottom for thick PVC/ABS, pneumatically activated.
  • Flat Glue Scraper Unit:
    Top & bottom, pneumatically activated to remove potential glue squeeze-out.
  • Buffing Unit:
    Top & bottom edge buffing/polishing.

    CONTROLS
  • HOMATIC PC 22 Power Control:
    Controller functions in Windows environment and features: Keypad w/LCD flat screen display, fault diagnostic, OS9 real-time operating system. Hand-held remote control pendant reaching to the out-feed end of the machine, very useful for set-up and testing new programs. 
  • Spraying Units:
    Top/Bottom spraying device is designed for applying a separating agent, for easier cleaning of any residual glue on the panel.

    A separating agent is applied by spray nozzles, which are located in front of the panel sizing with manual adjustment in case of modifications of panel overhang

    includes (1) 2 liter (0.53 gallons) capacity holding tank

    FEATURES;
  • Variable Feed-speed:
     ● From 18 - 25 MPM (59 ~ 82 FPM); 80 mm feed track pads; Motorized top pressure beam V belt;  ● Manual raising & lowering of top pressure beam via digital counter.  ● Manual adjustment of the infeed fence via digital counter for use with the pre-milling station  ● Extendable Panel Support to max 800 mm (31.5") ● SIKO Digital adjustments;  ● Electronic DC brakes on all trim motors,  ● Sound cabins for all trim workstations,  ● Standard adjustable outboard panel support with additional floor supports for heavy panels. 
  • Actual Model is HOMAG OPTIMAT AMBITION 2262

     
Questions? For Instant Communication, Click Here
Special Note: New Arrival
Comment: GREAT machine in EXCELLENT condition...under power & available for Inspection!
*Dimensions: 310" L x 52" W x 72" H
*Weight: 8,000 Lbs
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions