You are not logged in.    Login  |  Register  |  Help

We are awaiting video for this item from the principals. Click here to view all literature

For Immediate Answers Contact:
Bob Bullin
(800) 374-5009 ext.  346
Intl. +1 (704) 841-2001

If not available, try his/her backup:
Louis Sicotte ext 329

EXF #:   EO-012277  


Machine Type:  


Year of Mfg.:   2002
Condition:   Good Condition   
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Value New: $ 215,000    Act Now!
Price: $   27,900 USD     (Convert)
Financing:   $ 567 National Capital Leasing
Region:   MIDWEST (Click for Regional Map)




  • Working Capacity:
    System for 0.4 - 3 mm Edge thickness cap., min. panel width 55 mm (2-1/4"), panel thickness 12 - 60 mm, min. edge length 10-1/4". 

    Line control with "HOMATIC NC 21" controller features: Keypad & LCD display, stores working programs and controls functions of workstations, allows fault diagnostic and comes with pendant for manual line control.

    Equipped With:
  • Automatic (6) vertical coil feed magazine. 
  • Quick Melt glue system w/pre-melt granular hopper and with roller applicator (reversible).
  • Pneumatic pressure roll section with (1) large dia. driven and (2) pneumatically controlled idle rollers.
  • 2-Position infeed fence; Pre-milling for 30 mm thickness max. material (3 kW - 9,000 RPM motors). 

  •  End Trimming, double motor front & rear end snip (0.18 kW - 12,000 RPM ea.), electropneumatic resetting from chamfer to straight and stepless adjustment of lateral snipping for different edge thicknesses.
  •  Rough Trimming, top & bottom (0.55 Kw - 12,000 RPM motor ea.).
  •  Universal Trimming Unit, "FK-11" (2-motor) profile trimming (0.55 kW - 12,000 RPM), serves as top/bottom fine trimming AND corner rounding for different thicknesses of PVC/ABS edging, with dust collection fitted for 2 mm & 3 mm cutters.
  •  Profile Scraping Unit, for PVC "MN 20" for different profiles (manual adjustment), PVC suction box for chips.
  • Buffing Unit, top & bottom (0.25 kW - 1,650 RPM motors).

    Complete With:
  • Top Pressure beam with V-belt hold-down, 80 mm wide heavy duty feed chain w/rubber pads, automatic chain track lubrication system, and 4 HP feed drive for variable feed speed 23 - 98 FPM.
  • Waste conveyor thru machine, wide fixed panel support with adjustable skates for extra large panels.
  • Machine is approximately 7.8 meters long (25.5 Feet).
Questions? For Instant Communication, Click Here
Special Note:
Comment: Will be available June 10 2019 , can see under power.
*Dimensions: Available From Product Manager
*Weight: Please Call
Written By: Dan Wolters
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions