You are not logged in.    Login  |  Register  |  Help
 
 

Additional Photos (Click to view Larger)
 
We are awaiting video for this item from the principals.
Play
Video
Click here to view all literature
View
Literature
Literature
Video

For Immediate Answers Contact:
Karl Balg
(800) 374-5009 ext.  355
Intl. +1 (704) 841-2001
Karl.balg@exfactory.com





If not available, try his/her backup:
Bob Bullin ext 346
bob.bullin@exfactory.com


EXF #:   EO-012140  
Brand/Model:  

HOMAG KAL 310/7/A20/S2

Machine Type:  

EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)

Year of Mfg.:   2004
Condition:   Cleaned and checked   
Elect./Voltage:   380/400 V, 50 Cy, 3 Ph.
Value New: € 215,000  
Price: Please Call    Act Now!
Financing:   National Capital Leasing
Region:   EUROPE (Click for Regional Map)

Description:

HOMAG KAL 310/7/A20/S2 ... Production Edgebander with Pre-Milling & Corner Rounding

Working Capacity:
0.4 - 20 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 25 MPM (59' to 82' FPM).

Equipped with:

  • Pre-Milling Unit # 3481: 2 x 3 KW, 9000 RPM, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence.
  • Pre-Heating Unit # 2325: With quartz lamps for heating the substrate to achieve optimum edgebonding.
  • Hot Melt Glue System "QA 34" # 2123: with reversible glue roller applicator;
  • Edge Magazine # 2999: Multi-purpose automatic coil/strip magazine, coils 0.3 - 3.0 mm, strips 0.4 - 20 mm
  • Pressure Section Type "C" # 2507: Pressure roll section with (7) rollers, (1) large dia. driven & (6) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses.
  • HOMATIC "PC 21" Powern Control System: Controller operates in Windows-XP environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem.

    Workstations:
  • End Trimming Unit "HL 85": Light weight, high speed 2 x 0.5 kW - 200 Hz, (0.7 HP - 12,000 RPM each) to cut excess edge on the front & back of the panel.
  • Flush/Pre-Trimming Unit # 3209: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters.
  • Profile Trimming / Corner Rounding Unit "FK11": Multi function (2) motors to process the edge overhangs at the workpiece upper and lower edge, as well as trimming around the front & rear edge. KW 0.4 x 2 (HP 0.54 x 2) motor ea.
  • Profile Edge Scraping Unit "PN 10": with electro-pneumatic adjustment
  • Finish process Unit with Glue Scraper + Buffing Unit "FA 11": Flat top and bottom panel surface glue scraper & buffing, removes any potential squeezed-out glue resedue.
  • Belt Sanding Unit "KS 10":  (abrasive papers) for straight edge

    Complete with & Features:
  • Electronic DC brakes on all trim motors; sound cabin for all workstations.
  • Adjustable outboard panel support with swing out arms for up to 800 mm.
  • 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations.
  • Options Include:  Ligmatech "ZHR 15" return conveyor as pictured.

    Actual Model #: KAL 310/7/A20/S2

    Note:  EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistic” from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.
Questions? For Instant Communication, Click Here
Special Note: Premier
Comment:
*Dimensions: 330" L x 126" W x 71" H
*Weight: 8,000 Lbs
Written By: Bob Bullin
*Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.

Terms & Conditions